Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)

<Previous Article In Volume
Next Article In Volume>

Testing Device for Biaxial Loading of Textile Specimens

Authors
Ales Lufinka1, *
1Technical University of Liberec, Studentska 2, 46117, Liberec, Czech Republic
*Corresponding author. Email: ales.lufinka@tul.cz
Corresponding Author
Ales Lufinka
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-182-1_4How to use a DOI?
Keywords
Textile structures; Biaxial loading; Testing device; Control system; Labview
Abstract

Testing of real properties of textile specimens is needed during the development of new textile structures. One of the basic test is determining the specimen stiffness, it means measurement of the dependence of the force on the textile material stretching. Textile materials are mostly used in technical practice as products in the form of a surface (car seat cover, sail on a boat, etc.). Moreover, textile materials (unlike similar tests of metallic materials, for example) very often exhibit very different properties in different directions due to their structure. The test results depend on the orientation of the loading force against the fibers of the textile structure. For some types of textile materials (eg various nonwovens) this dependence can be very pronounced. For the above reasons, it is clear that the textile material needs to be loaded simultaneously in several directions. So, the biaxial loading device was built because biaxial loading provides more complex information about the structure properties than uniaxial. Perfect load coordination in both axes must be observed in these tests. The test device control system design is described in this paper.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
978-94-6463-182-1
ISSN
2589-4943
DOI
10.2991/978-94-6463-182-1_4How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Ales Lufinka
PY  - 2023
DA  - 2023/05/30
TI  - Testing Device for Biaxial Loading of Textile Specimens
BT  - Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
PB  - Atlantis Press
SP  - 23
EP  - 32
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-182-1_4
DO  - 10.2991/978-94-6463-182-1_4
ID  - Lufinka2023
ER  -