Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)

<Previous Article In Volume
Next Article In Volume>

Welded and Bolted Frames of Freight Electric Vehicles

Authors
Ladislav Ševčík1, *
1Department of Machine Design, Mechanical Faculty, Technical University of Liberec, Liberec, Czechia
*Corresponding author. Email: ladislav.sevcik@tul.cz
Corresponding Author
Ladislav Ševčík
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-182-1_14How to use a DOI?
Keywords
electric vehicle; FEM; welding; bolt; high-strength steel
Abstract

In the contribution is made FEM calculation of frames of freight electric vehicles. A comparison is made between welded and screwed frame joints of high strength steel. A strength check was carried out on the basis of the tensile tests of the welded material and a check with screwed version.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
10.2991/978-94-6463-182-1_14
ISSN
2589-4943
DOI
10.2991/978-94-6463-182-1_14How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Ladislav Ševčík
PY  - 2023
DA  - 2023/05/30
TI  - Welded and Bolted Frames of Freight Electric Vehicles
BT  - Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
PB  - Atlantis Press
SP  - 117
EP  - 127
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-182-1_14
DO  - 10.2991/978-94-6463-182-1_14
ID  - Ševčík2023
ER  -