Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)

<Previous Article In Volume
Next Article In Volume>

Numeric Simulation of Part Assembly During Pressing Within Assembly Production Process

Authors
Pavel Srb1, *, Josef Vosahlo1, Michal Petrů1
1Institute for Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec, Studentska 2, Liberec, 461 17, Czech Republic
*Corresponding author. Email: pavel.srb@tul.cz
Corresponding Author
Pavel Srb
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-182-1_24How to use a DOI?
Keywords
Joining; Forming; FEM simulation
Abstract

The article deals with numerical analysis for a study of the stress distribution and deformation of the component assembly during pressing within the assembly manufacturing process. The assembly design consists of a steel casing and a steel bottom and top lid. The fusion of the casing to the lids is realized through the plastic deformation of the structural elements of the casing. The quality of the combination of the parts is influenced by, among other things, the manufacturing tolerances of the individual semi-finished products, the shape of the forming tool and the course of the forming force. A numerical simulation was created using an explicit algorithm, where the corresponding marginal and initial conditions and time dependency of the manufacturing process were defined. The different parts of the assembly were in delicate contact, so as to predict the force action in the different parts during the manufacturing process. The model created can be used to upgrade the geometry of individual parts of the report as well as the forming tool and contribute to the optimization of the production process.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
10.2991/978-94-6463-182-1_24
ISSN
2589-4943
DOI
10.2991/978-94-6463-182-1_24How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Pavel Srb
AU  - Josef Vosahlo
AU  - Michal Petrů
PY  - 2023
DA  - 2023/05/30
TI  - Numeric Simulation of Part Assembly During Pressing Within Assembly Production Process
BT  - Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
PB  - Atlantis Press
SP  - 227
EP  - 233
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-182-1_24
DO  - 10.2991/978-94-6463-182-1_24
ID  - Srb2023
ER  -