Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)

<Previous Article In Volume
Next Article In Volume>

Mechanical Properties of Groove Squared Profiles Made of Carbon Composite Material with Cured Epoxy in Shape Form and by Vacuum

Authors
Ľuboš Kučera1, *, Tomáš Gajdošík1, Igor Gajdáč1, Jozef Škrabala1
1University of Žilina, Univerzitná, 8215/1, 01026, Žilina, Slovakia
*Corresponding author. Email: lubos.kucera@fstroj.uniza.sk
Corresponding Author
Ľuboš Kučera
Available Online 30 May 2023.
DOI
10.2991/978-94-6463-182-1_20How to use a DOI?
Keywords
Carbon; Mechanical Properties; Rectangular Shell Composite; Form Shape; Vacuum Shape
Abstract

This article describes mechanical differences in behaviour of groove squared profiles, which are made of carbon composite material. Specimens were made by winding of prepreg carbon fibre filament around Rexroth profile. Afterward was epoxy of first specimen cured in shape form and the epoxy of second specimen was cured in vacuum chamber. This way was made two difference internal structures with different mechanical properties. Their properties were tested by bend test. Bend test lasted till first hearable cracking and not until complete breakage of material. By this way, we describe carbon composite material by properties before even small breakages in internal structure. Measurement data can be used for comparisons with simulation FEM analysis. This is especially important in developing new products. This work was done at University of Žilina Faculty of Mechanical engineering, Department of Design and Mechanical Elements. The tests were performed on tensile test machine LabTest 5.20ST type: KAP-S.

Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
Series
Atlantis Highlights in Engineering
Publication Date
30 May 2023
ISBN
10.2991/978-94-6463-182-1_20
ISSN
2589-4943
DOI
10.2991/978-94-6463-182-1_20How to use a DOI?
Copyright
© 2023 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Ľuboš Kučera
AU  - Tomáš Gajdošík
AU  - Igor Gajdáč
AU  - Jozef Škrabala
PY  - 2023
DA  - 2023/05/30
TI  - Mechanical Properties of Groove Squared Profiles Made of Carbon Composite Material with Cured Epoxy in Shape Form and by Vacuum
BT  - Proceedings of the 61st International Conference of Machine Design Departments (ICMD 2020)
PB  - Atlantis Press
SP  - 180
EP  - 190
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-182-1_20
DO  - 10.2991/978-94-6463-182-1_20
ID  - Kučera2023
ER  -