Proceedings of the 2016 5th International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2016)

Experimental study on pyrolysis water used as lignite molding water

Authors
Xiaonan Zhao, Li Ding, Erqian Su, Shunli Zhang, Daohong Wu
Corresponding Author
Xiaonan Zhao
Available Online October 2016.
DOI
https://doi.org/10.2991/iccahe-16.2016.60How to use a DOI?
Keywords
Lignite; molding coal; pyrolysis water; pyrolysis characteristics
Abstract

The influence of pyrolysis water which was used as molding water of powdered coal on molding coal pyrolysis conversion rate and semi-coke strength was experimentally researched in the pyrolysis experimental device independently developed by Beijing Shenwu Environment & Energy Technology Co., Ltd,. The experimental results were showed that pyrolysis water can enhance the strength of the semi-coke, increase CH4 and H2 component content of pyrolysis gas, improve yield and quality of tar. Tar yield in the pyrolysis process of molding coal used pyrolysis water as molding water(MCPW) was 1.4 times than that of molding coal used new water as molding water(MCNW), and the content of light oil in pyrolysis of MCPW was higher.

Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2016 5th International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2016)
Series
Advances in Engineering Research
Publication Date
October 2016
ISBN
978-94-6252-250-3
ISSN
2352-5401
DOI
https://doi.org/10.2991/iccahe-16.2016.60How to use a DOI?
Copyright
© 2016, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Xiaonan Zhao
AU  - Li Ding
AU  - Erqian Su
AU  - Shunli Zhang
AU  - Daohong Wu
PY  - 2016/10
DA  - 2016/10
TI  - Experimental study on pyrolysis water used as lignite molding water
BT  - Proceedings of the 2016 5th International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2016)
PB  - Atlantis Press
SP  - 338
EP  - 341
SN  - 2352-5401
UR  - https://doi.org/10.2991/iccahe-16.2016.60
DO  - https://doi.org/10.2991/iccahe-16.2016.60
ID  - Zhao2016/10
ER  -