Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Study on the determination of elastic modulus of amorphous alloy by the acoustic method

Authors
Haibo Mao, Duanneng Li, Shaochu Zheng
Corresponding Author
Haibo Mao
Available Online October 2015.
DOI
10.2991/icadme-15.2015.364How to use a DOI?
Keywords
Amorphous alloy, Elastic modulus, Acoustic method, Cantilever beam, Transient vibration
Abstract

This paper studys on the determination of elastic modulus of amorphous alloys by acoustic method. The method is simple and effective, convenient and fast, non-destructive and has strong practical significance. A cantilever beam structure is selected, and the non-contact acoustic measurement and analysis system is composed of MM 210 microphone, DT9837 series data acquisition unit, computer and dewesoft7.0 software. The vibration of the specimen is generated by the transient vibration, which generates a sound wave, and the inherent frequency is obtained by the sensor data acquisition and software analysis. According to the theoretical formula of the inherent frequency of the cantilever beam, the elastic modulus of the amorphous alloy is calculated, at the same time, the measurement results are compared with the three-point bending test method. Finally, the finite element method is used to verify the inverse analysis.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
10.2991/icadme-15.2015.364How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Haibo Mao
AU  - Duanneng Li
AU  - Shaochu Zheng
PY  - 2015/10
DA  - 2015/10
TI  - Study on the determination of elastic modulus of amorphous alloy by the acoustic method
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 1966
EP  - 1970
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.364
DO  - 10.2991/icadme-15.2015.364
ID  - Mao2015/10
ER  -