Effects of Attrition on Microstructure of Electroformed Nickel
- 10.2991/icadme-15.2015.256How to use a DOI?
- electroforming, friction, microstructure, nickel
The nickel deposits of different microstructures were obtained by electroforming with abrasive-assisted, .The effects of friction strength on the surface morphology and the microstructures of the deposits were studied. The results indicate that the deposits with homogeneous microstructures were obtained with the horizontal cathode, during the abrasive-assisted electroforming process of nickel. The surface smoothness was improved and the nickel crystal grain was refined with the increasing linear velocity. The nickel deposits could be obtained with a wide range of microstructures at different speed of the rotating cathode, which the grain size was in the range from 100nm to 600nm. The difference value of growth rate of the various crystal faces is getting smaller with the increasing velocity of the cathode.
- © 2015, the Authors. Published by Atlantis Press.
- Open Access
- This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).
Cite this article
TY - CONF AU - Furong Zhang AU - Yong Zhang AU - Xueyu Li PY - 2015/10 DA - 2015/10 TI - Effects of Attrition on Microstructure of Electroformed Nickel BT - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering PB - Atlantis Press SP - 1392 EP - 1396 SN - 2352-5401 UR - https://doi.org/10.2991/icadme-15.2015.256 DO - 10.2991/icadme-15.2015.256 ID - Zhang2015/10 ER -