The mechanical properties of 1060 aluminum joint by continuous drive friction welding

DOI

10.2991/icadme-15.2015.166How to use a DOI?

Keywords

Friction welding, Aluminum, Mechanical properties

Abstract

Pure aluminum was welded by friction welding in this study. Friction welding of pure aluminum was performed in the fixed upset pressure and friction pressure respectively. The tensile strength of joints was measured. According to the studies performed, pure aluminum welding effect of welding parameters on the tensile strength, friction pressure and upset pressure are the 3.5kN, the maximum tensile load of the welded joint, joint strength, 29.1kN. Parameter influence on deformation of joints, pressure and friction presses increase, such that the displacement increases, excessive wear and flanging on the adverse effects on material properties. The results have revealed a successful joint. Therefore pure aluminum in friction pressure is 2kN, upset pressure is 2kN, friction is 2.5s, can get sound joint.

Copyright

© 2015, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Qingzhe Li
AU  - Ranfeng Qiu
AU  - Zhongbao Shen
AU  - Longlong Hou
AU  - Lihu Cui
PY  - 2015/10
DA  - 2015/10
TI  - The mechanical properties of 1060 aluminum joint by continuous drive friction welding
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 864
EP  - 868
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.166
DO  - 10.2991/icadme-15.2015.166
ID  - Li2015/10
ER  -