Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Friction Welding of magnesium alloys

Authors
Zhongbao Shen, Ranfeng Qiu, Qingzhe Li, Longlong Hou, Lihu Cui
Corresponding Author
Zhongbao Shen
Available Online October 2015.
DOI
10.2991/icadme-15.2015.165How to use a DOI?
Keywords
Friction welding, Magnesium alloys
Abstract

Magnesium alloys were welded by friction welding. The mechanical properties of the joint were investigated; the effects of welding parameters on flanging amount, wear amount and tensile shear load of the joints were discussed. The results show that the joint strength increases with the increase of friction force and decreases with the increase of upset force. As a result, we could obtain high quality weld joint when friction pressure is 2 kN, and upset pressure is 2 kN.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
10.2991/icadme-15.2015.165How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Zhongbao Shen
AU  - Ranfeng Qiu
AU  - Qingzhe Li
AU  - Longlong Hou
AU  - Lihu Cui
PY  - 2015/10
DA  - 2015/10
TI  - Friction Welding of magnesium alloys
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 858
EP  - 863
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.165
DO  - 10.2991/icadme-15.2015.165
ID  - Shen2015/10
ER  -