Proceedings of the 4th Forum in Research, Science, and Technology (FIRST-T1-T2-2020)

<Previous Article In Volume
Next Article In Volume>

Experimental Research of the Influence of Hot Machining Method on AISI 4340 Lathe Machine Process Towards Specific Cutting Energy and Surface Roughness

Authors
T Ismail, S Dyos, Y Joni, S Samuel, W Abdurahman, Y Aldi
Corresponding Author
T Ismail
Available Online 9 February 2021.
DOI
10.2991/ahe.k.210205.024How to use a DOI?
Keywords
hot machining, dry cutting, surface roughness, specific cutting energy
Abstract

This research is about the experimental investigation of AISI 4340 turning process using carbide tools with hot machining and dry cutting methods. The workpiece is heated using torch flame gas. Experimental analysis is held at various machining conditions for hot machining and dry cutting methods by focusing on the measuring specific cutting energy. The calculation of specific cutting energy is carried out theoretically. The purpose of this research is to observe the effect of various machining process conditions of the workpiece on specific cutting energy of the workpiece. This research also analyzed the effect of specific cutting energy on the surface roughness of the workpiece based on machining parameters after machining. The results showed that the feeding rate was the most influencing factor in determining the value of surface roughness and specific cutting energy. Based on the comparison between hot machining and dry cutting, hot machining provides a lower value of specific cutting energy than dry cutting.

Copyright
© 2021, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 4th Forum in Research, Science, and Technology (FIRST-T1-T2-2020)
Series
Atlantis Highlights in Engineering
Publication Date
9 February 2021
ISBN
10.2991/ahe.k.210205.024
ISSN
2589-4943
DOI
10.2991/ahe.k.210205.024How to use a DOI?
Copyright
© 2021, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

risenwbib
TY  - CONF
AU  - T Ismail
AU  - S Dyos
AU  - Y Joni
AU  - S Samuel
AU  - W Abdurahman
AU  - Y Aldi
PY  - 2021
DA  - 2021/02/09
TI  - Experimental Research of the Influence of Hot Machining Method on AISI 4340 Lathe Machine Process Towards Specific Cutting Energy and Surface Roughness
BT  - Proceedings of the 4th Forum in Research, Science, and Technology (FIRST-T1-T2-2020)
PB  - Atlantis Press
SP  - 129
EP  - 134
SN  - 2589-4943
UR  - https://doi.org/10.2991/ahe.k.210205.024
DO  - 10.2991/ahe.k.210205.024
ID  - Ismail2021
ER  -