Proceedings of the 4th Forum in Research, Science, and Technology (FIRST-T1-T2-2020)

Study of Temperature and Use of Catalysts in the Pyrolysis of LDPE Plastic Waste on the Quantity of Oil Fuel Products Produced

Authors
Novarini, Rusdianasari, Yohandri Bow, Sigit Kurniawan
Corresponding Author
Rusdianasari
Available Online 9 February 2021.
DOI
10.2991/ahe.k.210205.005How to use a DOI?
Keywords
catalyst, LDPE plastic waste, pyrolysis, temperature
Abstract

Low Density Poly Ethylene (LPDE) plastic waste has no sale value, buried in a landfill. The plastic itself cannot be broken down by microorganisms in the soil, so that people destroy it through incineration. Incineration plastics produce NOx, COx, SOx, particulates, dioxins, furans, and smoke, which can increase air pollution with acid rain and global warming. The purpose of this research is to solve this plastic waste so that it can be reprocessed into more valuable fuel through the pyrolysis process. The pyrolysis equipment used is a reactor unit made of stainless steel and equipped with an insulator made from rock wall. The primary tar reservoir is between the reactor outlet channel and the condenser inlet. The condenser unit is made of a steel shell and a spiral-shaped copper tube where the condensed product is a secondary tar product. The pyrolysis process produces 3 products, namely solid residue (char), liquid product (tar), and gas products. The number of products analyzed in this study only char and tar in the pyrolysis of LDPE plastic waste was analyzed based on temperature variations, namely 200°C, 250°C, and 300°C. The process in the reactor using natural zeolite catalysts. The results obtained are the highest quantity of char 10.80% and the primary tar 81.19% by processing in a reactor with a temperature of 200°C without the use of a catalyst, the secondary tar product 91.01% by processing in a reactor temperature of 300°C using a catalyst. The highest yield of fuel oil was 94.80%, and the lowest remaining solids residue was 5.2% in the reactor process using a catalyst with a temperature of 300°C for 6 hours.

Copyright
© 2021, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 4th Forum in Research, Science, and Technology (FIRST-T1-T2-2020)
Series
Atlantis Highlights in Engineering
Publication Date
9 February 2021
ISBN
978-94-6239-332-5
ISSN
2589-4943
DOI
10.2991/ahe.k.210205.005How to use a DOI?
Copyright
© 2021, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Novarini
AU  - Rusdianasari
AU  - Yohandri Bow
AU  - Sigit Kurniawan
PY  - 2021
DA  - 2021/02/09
TI  - Study of Temperature and Use of Catalysts in the Pyrolysis of LDPE Plastic Waste on the Quantity of Oil Fuel Products Produced
BT  - Proceedings of the 4th Forum in Research, Science, and Technology (FIRST-T1-T2-2020)
PB  - Atlantis Press
SP  - 24
EP  - 28
SN  - 2589-4943
UR  - https://doi.org/10.2991/ahe.k.210205.005
DO  - 10.2991/ahe.k.210205.005
ID  - 2021
ER  -