Design Compression Molding Machine with Hydraulic System

Fatahul Arifin; Yusuf Dewantoro Herlambang; Dwi Arnoldi; Eka Satria Martomi; Muhammad Noviadi; Hanif Akbar; Jihan Salsabilla

doi:10.2991/978-94-6463-118-0_4

<Previous Article In Volume

Next Article In Volume>

Design Compression Molding Machine with Hydraulic System

Authors

Fatahul Arifin¹^{, *}, Yusuf Dewantoro Herlambang², Dwi Arnoldi¹, Eka Satria Martomi¹, Muhammad Noviadi¹, Hanif Akbar¹, Jihan Salsabilla¹

¹Mechanical Engineering, Politeknik Negeri Sriwijaya, Palembang, 30154, Indonesia

²Mechanical Engineering, Politeknik Negeri Semarang, Semarang, 50275, Indonesia

^*Corresponding author. Email: farifinus@polsri.ac.id

Corresponding Author

Fatahul Arifin

Available Online 26 June 2023.

DOI: 10.2991/978-94-6463-118-0_4 How to use a DOI?
Keywords: Seal; Fire; Extinguisher; Temperature
Abstract: Seal is a part of the machine that is used by one of the Light Fire Extinguishers (LFE) so that the contents of this tube are kept awake until it is used to extinguish the fire. In the process of making this seal, a machine is used mold to make the seal part. One is as male (upper mold) and the second as female (lower mold). The one of the methods offered is a compression system using hydraulics and a heating system using a temperature control system, the process of which can be controlled using the electronic devises. In this study, a compression molding machine was produced with temperature settings from 100 ℃ to 900 ℃, from the results of experiments carried out on this machine, it can produce seal products that meet market standards, namely having h.gh adhesion and resistance to high pressure vessel especially for the light fire extinguisher (LFE).
Copyright: © 2023 The Author(s)
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume

Next Article In Volume>

Volume Title: Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI-22)
Series: Atlantis Highlights in Engineering
Publication Date: 26 June 2023
ISBN: 10.2991/978-94-6463-118-0_4
ISSN: 2589-4943
DOI: 10.2991/978-94-6463-118-0_4 How to use a DOI?
Open Access: Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

ris enw bib

TY  - CONF
AU  - Fatahul Arifin
AU  - Yusuf Dewantoro Herlambang
AU  - Dwi Arnoldi
AU  - Eka Satria Martomi
AU  - Muhammad Noviadi
AU  - Hanif Akbar
AU  - Jihan Salsabilla
PY  - 2023
DA  - 2023/06/26
TI  - Design Compression Molding Machine with Hydraulic System
BT  - Proceedings of the 6th FIRST 2022 International Conference (FIRST-ESCSI-22)
PB  - Atlantis Press
SP  - 24
EP  - 29
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-118-0_4
DO  - 10.2991/978-94-6463-118-0_4
ID  - Arifin2023
ER  -

download .riscopy to clipboard