CAN Bus Module and Wiper Motor Compatibility Issues Research And Analysis

DOI

10.2991/eeeis-17.2017.6How to use a DOI?

Keywords

CAN-Bus-module, Filtering, PWM, Show of Hands, Recharge-voltage

Abstract

The CAN bus module used in passenger cars has the potential problems of short service life, maloperation and control inaccuracy, etc. In order to improve the reliability and operational stability of the module, the following issues are investigated: (1) Using PWM output to improve the service life of the module power chip; (2) Using filter processing technology or showing of hands to reduce the noise which disturb of the module to distinguish the cam signal; (3) Using diode to suppress the recharge voltage to disturb of the module. After the practical application with different types of wiper motor, it shows that the above method can well solve the compatibility of the module and the wiper motor, greatly improving the reliability and stability of the CAN bus module.

Copyright

© 2017, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Shao-Feng LI
AU  - Shan-Hu YU
AU  - Xiao-An LIU
AU  - Xiao-Ming WANG
PY  - 2017/09
DA  - 2017/09
TI  - CAN Bus Module and Wiper Motor Compatibility Issues Research And Analysis
BT  - Proceedings of the 3rd Annual International Conference on Electronics, Electrical Engineering and Information Science (EEEIS 2017)
PB  - Atlantis Press
SP  - 32
EP  - 39
SN  - 2352-5401
UR  - https://doi.org/10.2991/eeeis-17.2017.6
DO  - 10.2991/eeeis-17.2017.6
ID  - LI2017/09
ER  -