2nd Annual International Conference on Energy, Environmental & Sustainable Ecosystem Development (EESED 2016)

Experimental study on the characteristics of mixed molding fuel with sludge and corn stalk

Authors
Wen-Yang Sun, Li-Ming Wang, Yan-Ru Ma, Yang Lv, Kang Feng, Wen-Tao Li
Corresponding Author
Wen-Yang Sun
Available Online August 2016.
DOI
10.2991/eesed-16.2017.81How to use a DOI?
Keywords
Molding Fuel; Sludge; Corn Stalk; Physical Quality
Abstract

To solve the problem of utilization of typical waste resources in Daqing, the rich corn stalk in Daqing and the Daqing oilfield waste sludge were respectively selected as major and auxiliary raw. The influence of sludge proportion, moisture content of mixed materials and molding pressure on quality characteristics of mixed molding was investigated. Maximum pressure and deformation displacement were introduced to measure the mechanical properties of molding fuel. The results showed that the sludge proportion was from 5% to 10%, the moisture content of mixed materials was from 10% to 12%, and the molding pressure was from 25Mpa to 30Mpa. Under this condition, physical qualities of molding fuel were better. This study may provide a theoretical basis for making molding fuel with mixed materials and providing a new consideration for the resource utilization of sludge.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
2nd Annual International Conference on Energy, Environmental & Sustainable Ecosystem Development (EESED 2016)
Series
Advances in Engineering Research
Publication Date
August 2016
ISBN
978-94-6252-309-8
ISSN
2352-5401
DOI
10.2991/eesed-16.2017.81How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Wen-Yang Sun
AU  - Li-Ming Wang
AU  - Yan-Ru Ma
AU  - Yang Lv
AU  - Kang Feng
AU  - Wen-Tao Li
PY  - 2016/08
DA  - 2016/08
TI  - Experimental study on the characteristics of mixed molding fuel with sludge and corn stalk
BT  - 2nd Annual International Conference on Energy, Environmental & Sustainable Ecosystem Development (EESED 2016)
PB  - Atlantis Press
SP  - 584
EP  - 589
SN  - 2352-5401
UR  - https://doi.org/10.2991/eesed-16.2017.81
DO  - 10.2991/eesed-16.2017.81
ID  - Sun2016/08
ER  -