Proceedings of the Rocscience International Conference 2025 (RIC 2025)

219 authors
Abdennadher, Mohamed
Virtual Experiments on Coarse-Grained Soil Using X-Ray CT and Finite Element Analysis
Acacio, Alexis A.
Development of Empirical Correlations between Shear Wave Velocities (Vs) and Standard Penetration Test (SPT) N-Values of Soils
Acacio, Alexis Philip A.
Ground Improvement through Permeation Grouting
Acacio, Alexis Philip A.
Correlation Between the In-Situ Soil Conditions and Strength of Jet Grout Soilcrete by a Double-Fluid System
Acacio, Alexis Philip A.
Comparative Analysis of Cone Penetration Testing (CPT) and Standard Penetration Testing (SPT) in Assessing Liquefaction Potential in the Philippine Geotechnical Context
Ahn, Jiwoo
Dragline Bench Stability in Open Cut Coal Mining
Ahn, Jiwoo
Using 3D Slope Stability Analysis in an Open-cut Coal Strip Mine: A Case Study
Akdag, Selahattin
Evaluation of Shotcrete Performance Enhancement Using Bio-Admixture
Akosah, Stephen
Investigating Thermal Damage of Sandstone
Akosah, Stephen
Machine Learning-Based Estimation of Unconfined Compressive Strength and Deformation Modulus of Heated Gold Coast Sandstones
Albuquerque, Paulo Jose Rocha
Numerical Simulation of Compression Loaded Small-Diameter Defective and Intact Bored Piles
Andrews, Peter
Stability Risk and Economic Analysis of Steepened East Wall of Huni Pit- A case study
Arrafi, Raditya Ahmad Syah
Numerical Study on the Response of Buried Pipelines to Deep Excavations
Arriagada, C.
RS3 Stability analysis of cemented pasted-backfilled stopes transitioning from open pit at an Argentinian gold mine
Avanzini, Simone
The Influence of Material Layers on the Prediction of Rockfall Hazards for Highwalls
Azami, Alireza
Evaluating Vertical Stress in Backfilled Inclined Mine Stopes: Insights from Numerical Modeling and Monte Carlo Simulations
Azami, Alireza
Assessment of NorSand’s Performance under Zero Strain Boundary Conditions
Bahrani, Navid
Capturing Laboratory Properties and Behavior of Defected Marble Using 2D and 3D Finite Element Models
Bar, Neil
3D Finite Element Analysis of Sub-Level Caving Plan for Indicative Ground Support Requirements at Bozymchak Mine, Kyrgyzstan
Barros, Guilherme
Application of a New Stochastic Rockfall Fragmentation Approach For Lumped Mass Simulations
Barros, Guilherme
The Influence of Material Layers on the Prediction of Rockfall Hazards for Highwalls
Berezhnoi, V.
A Multi-Criteria Ranking Approach for Assessment of Geotechnical Data Uncertainty
Berisavljević, Zoran
Reliability Assessment of Slope Stability With Stepwise Increase in Slope Complexity
Berisavljević, Zoran
Overall Block Stability Analysis of Rock Slope with Semi-Automatic Extraction of Joint Properties from Point Cloud
Botha, Robert
A Geotechnical Reconciliation Journey Implementing A Risk-Based Framework Utilising Unmanned Aerial Vehicle (UAV) Photogrammetry-Based Mapping
Bretas, Thiago Cruz
Effect of Blast Vibration on Open Pit Slope Stability by Limit Equilibrium
Bretas, Thiago Cruz
Three-Dimensional Numerical Model Calibration of an Underground Mine Based on In-Situ Stress Measurements
Bretas, Thiago Cruz
Determination of Slope Excavation Rate Considering Pore Pressure Dissipation Through Back-Analysis
Bretas, Thiago Cruz
Comparison of Limit Equilibrium and Stress-Strain Stability Analyses of an Open-Pit Mine
Bretas, Thiago Cruz
Differential Settlements Evaluation on Landfill for Belt Conveyor System Construction Using RS3
Bretas, Thiago Cruz
3D Anchored Retaining Wall Stability Analysis
Bueno, Zharry
Effect of Blast Vibration on Open Pit Slope Stability by Limit Equilibrium
Bueno, Zharry
Differential Settlements Evaluation on Landfill for Belt Conveyor System Construction Using RS3
Buzzi, Oliver
Application of a New Stochastic Rockfall Fragmentation Approach For Lumped Mass Simulations
Cabañas, Jonalyn L.
Comparative Analysis of Cone Penetration Testing (CPT) and Standard Penetration Testing (SPT) in Assessing Liquefaction Potential in the Philippine Geotechnical Context
Cabral, Gabriel
Effect of Blast Vibration on Open Pit Slope Stability by Limit Equilibrium
Cabral, Gabriel
Differential Settlements Evaluation on Landfill for Belt Conveyor System Construction Using RS3
Cabral, Gabriel Mendes
Determination of Slope Excavation Rate Considering Pore Pressure Dissipation Through Back-Analysis
Cabral, Gabriel Mendes
Comparison of Limit Equilibrium and Stress-Strain Stability Analyses of an Open-Pit Mine
Cabral, Gabriel Mendes
3D Anchored Retaining Wall Stability Analysis
Cahyo, Fery
Slope Stability Analysis Using Limit Equilibrium and Finite Element Methods for Pit Tsunami Risk Assessment in Cadia Hill Open Pit
Campbell, Mark
Addressing Rockfall Risks Post-Grassfire in the Rhigos Mountains: A Case Study on Innovative Attenuator System Design
Carlton, Rebecca
Fine-Tuning the Design: Practical Application of Discrete Fracture Networks in 3D Finite-Element Models
Carriero, Maria Teresa
Hybrid barriers and attenuators: full scale tests based on a reliability-design approach for actions and resistances, aimed to calibrating numerical models
Carvalho, Lucas Guimarães
Comparison of Limit Equilibrium and Stress-Strain Stability Analyses of an Open-Pit Mine
Carvalho, Lucas Guimarães
Differential Settlements Evaluation on Landfill for Belt Conveyor System Construction Using RS3
Carvalho, Lucas Guimarães
3D Anchored Retaining Wall Stability Analysis
Chamoun, George
Swedish Road Cuttings – National Inventory, Definition and Risk Status
Chavali, Rama Vara Prasad
Evaluating Vertical Stress in Backfilled Inclined Mine Stopes: Insights from Numerical Modeling and Monte Carlo Simulations
Chen, Baixi
Capturing Laboratory Properties and Behavior of Defected Marble Using 2D and 3D Finite Element Models
Chen, Xuejian
Seismic Landslide Risk Assessment: Random Large-Deformation Analysis in Spatially Cross-correlated Cohesive-Frictional Soils
Chow, Helen S. W.
Simplified Solutions for a Pier in a Two-Layered System and subjected to Lateral and Moment Loadings
Cooper, Ned
Evaluation of Shotcrete Performance Enhancement Using Bio-Admixture
Corkum, Brent
Rockfall Back Analysis of an Experimental Case History
Corsino, Jr. Reuel S.
Development of Empirical Correlations between Shear Wave Velocities (Vs) and Standard Penetration Test (SPT) N-Values of Soils
Cota, Thales Furtado
Determination of Slope Excavation Rate Considering Pore Pressure Dissipation Through Back-Analysis
Cota, Thales Furtado
Comparison of Limit Equilibrium and Stress-Strain Stability Analyses of an Open-Pit Mine
Cruz, Mikaela Angie P.
Correlation Between the In-Situ Soil Conditions and Strength of Jet Grout Soilcrete by a Double-Fluid System
Cudmani, Roberto
Numerical Analysis of The Drained/Undrained Behaviour of Clays From Self-Boring Pressuremeter Test
De Biagi, Valerio
A New Tool to Quantify the Failure Probability of Rockfall Net Fences
Dempers, G. D.
Enhancing Slope Stability Analysis with Accurate Representation of Rock Bridges and Discontinuities
Dight, Phil
In Situ Stress Determination, 3D Rock Properties and Numerical Modelling
Ding, Zeng
Investigating Thermal Damage of Sandstone
Douglas, Kurt
Efficient Simulation of Tunnel-Induced Failure in Brittle Rock Based on a Mesh-Independent Fracture Mechanics Approach
Dube, James
A Geotechnical Reconciliation Journey Implementing A Risk-Based Framework Utilising Unmanned Aerial Vehicle (UAV) Photogrammetry-Based Mapping
Dudler, Remo
Addressing Rockfall Risks Post-Grassfire in the Rhigos Mountains: A Case Study on Innovative Attenuator System Design
Eccclestone, Duncan
Addressing Rockfall Risks Post-Grassfire in the Rhigos Mountains: A Case Study on Innovative Attenuator System Design
Eicher, Manuel
Addressing Rockfall Risks Post-Grassfire in the Rhigos Mountains: A Case Study on Innovative Attenuator System Design
Elmo, Davide
RS2 as a Tool for Simplified and Effective Analysis of Urban Tunnel-Induced Settlements
Farmer, Michael
Three-dimensional (3D) Rockfall Assessment for Landbridge Reclamation
Ferrero, Anna Maria
Hybrid barriers and attenuators: full scale tests based on a reliability-design approach for actions and resistances, aimed to calibrating numerical models
Fullilove, Jonathan
Addressing Rockfall Risks Post-Grassfire in the Rhigos Mountains: A Case Study on Innovative Attenuator System Design
Garcia, Jean Rodrigo
Numerical Simulation of Compression Loaded Small-Diameter Defective and Intact Bored Piles
George, Francesca
A Geotechnical Reconciliation Journey Implementing A Risk-Based Framework Utilising Unmanned Aerial Vehicle (UAV) Photogrammetry-Based Mapping
Gerridzen, Philip
Three-Dimensional Stability Assessment of a Tailings Embankment Adjacent to an Existing Open Pit
Ghafghazi, Mason
Assessment of NorSand’s Performance under Zero Strain Boundary Conditions
Giacomini, Anna
Monitoring and Prediction of Coastal Rockfall Hazard: An Application of RocSlope3 in Newcastle (Australia)
Giacomini, Anna
Application of a New Stochastic Rockfall Fragmentation Approach For Lumped Mass Simulations
Giacomini, Anna
Synthetic Slope Profiles to Assess Rockfall Hazard on Open Pit: Influence of Topography Uncertainties
Giacomini, Anna
The Influence of Material Layers on the Prediction of Rockfall Hazards for Highwalls
Go, Marc Arthur Z.
Ground Improvement through Permeation Grouting
Go, Marc Arthur Z.
Development of Empirical Correlations between Shear Wave Velocities (Vs) and Standard Penetration Test (SPT) N-Values of Soils
Go, Marc Arthur Z.
Correlation Between the In-Situ Soil Conditions and Strength of Jet Grout Soilcrete by a Double-Fluid System
Go, Marc Arthur Z.
Comparative Analysis of Cone Penetration Testing (CPT) and Standard Penetration Testing (SPT) in Assessing Liquefaction Potential in the Philippine Geotechnical Context
Gobbin, Luca
Hybrid barriers and attenuators: full scale tests based on a reliability-design approach for actions and resistances, aimed to calibrating numerical models
Gratchev, Ivan
Investigating Thermal Damage of Sandstone
Gratchev, Ivan
Machine Learning-Based Estimation of Unconfined Compressive Strength and Deformation Modulus of Heated Gold Coast Sandstones
Grimod, Alberto
Hybrid barriers and attenuators: full scale tests based on a reliability-design approach for actions and resistances, aimed to calibrating numerical models
Guccione, Davide Ettore
Monitoring and Prediction of Coastal Rockfall Hazard: An Application of RocSlope3 in Newcastle (Australia)
Guccione, Davide Ettore
Application of a New Stochastic Rockfall Fragmentation Approach For Lumped Mass Simulations
Guccione, Davide Ettore
The Influence of Material Layers on the Prediction of Rockfall Hazards for Highwalls
Guillermo, Noreen Joy T.
Ground Improvement through Permeation Grouting
Guy, Glen
Transberg Method. From Drone Flight to Hazard Map – adding value to Open Pit Geotechnical Assessments
Guzman, Carl Louis S.
Correlation Between the In-Situ Soil Conditions and Strength of Jet Grout Soilcrete by a Double-Fluid System
Habte, Michael
Brisbane’s Cross River Rail Project, Assessment of Cavern and Shaft Interaction for Albert Street Station
Habte, Michael
Three-Dimensional Stability Assessment of a Tailings Embankment Adjacent to an Existing Open Pit
Hammah, Reginald
Peer-Review Statements
Handspiker, Wyatt
Assessment of NorSand’s Performance under Zero Strain Boundary Conditions
Hantler, Aaron
Swedish Road Cuttings – National Inventory, Definition and Risk Status
Hsieh, Jun-Ren
Numerical Study on the Response of Buried Pipelines to Deep Excavations