Proceedings of the International Conference Recent Advances in Materials, Processes and Technology for Sustainability (RAMPTS 2025)
153 authors
- Abdulsamad, P. A.
- Effect of Heat Treatment on Microstructure and Mechanical Properties of Mg-5.5 Zn Alloy
- Abhijith, M. R.
- Immobilized Nitrogen-Doped TiO₂ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- Abhilash, S. S.
- Processing and Characterization of Eichhornia Crassipes Fiber Reinforced Hybrid Polymer Composites
- Abraham, Jerin
- Hazop and Hazid Analysis of Ammonia Barge Leaks
- Ajeesh, K. N.
- AI-Enabled PPE Surveillance System to Enhance Safety Standards in Shipyards
- Ajith, P. M.
- Improvement in Mechanical Properties of FB-TIG Welded AA6061 Using Laser Shock Peening
- Al Ameen, A.
- Development of a D-Limonene based Binder for Sulfur Cathodes in Lithium-Sulfur Battery
- Al Ameen, A.
- Immobilized Nitrogen-Doped TiO₂ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- Anagha, C. V.
- Modular Layout Design of Electric Catamaran Ferries for Inland Waterways Using Python
- Anandarajah, Gabrial
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Angitha, S.
- Risk Assessment and Mitigation Measures in Chemical Process Industry Using FTA, FAHP & ALOHA
- Anooja, A. U.
- Effect of Heat Treatment on Microstructure and Mechanical Properties of Mg-5.5 Zn Alloy
- Anu, N.
- Minimizing Dust Explosion in Chemical Looping Combustion Process Using an Engineered Oxygen Carrier
- Archana, S. R.
- Minimizing Dust Explosion in Chemical Looping Combustion Process Using an Engineered Oxygen Carrier
- Arun, M. S.
- Attention-Enhanced Graph Neural Networks for Accurate Prediction of Elastic Properties in Crystalline Materials
- Babu, C. V. Sumesh
- Numerical Analysis of Geometrically Modified Ejector Refrigeration System
- Bhadra, K. K.
- Sensor-Integrated Automation for Maturity Detection in Ayurvedic Product Manufacturing Using Temperature and RGB Image Analysis
- Biju, N.
- Process intensification in chemical reactors: An overview in the heat exchanger perspective
- Biju, P. V.
- Comparative Tribological Studies of A356 Alloy and A356/5 Wt.% Sicp Composite at Low Parametric Conditions During Unidirectional and Reciprocating Contacts
- Bindu, M. D.
- Peer-Review Statements
- Bindu, M. D.
- Characterization of high entropy alloy reinforced AA7068 Composite developed through stir casting
- Bindu, M. D.
- Experimental Analysis of Corrosion and wear behavior of Mg 5.5 Zn Bio-implant alloy
- Chalakkal, Jetha Benny
- Adsorptive Removal and Optimization of Cu (II) Ions Using Bio-Derived Chitosan from Crustacean Shells: A Response Surface Methodology Approach
- Chatanathodi, Raghu
- Janus MoWC MXene for Efficient Nitrogen Reduction: A DFT Study
- Deepa, S.
- Peer-Review Statements
- Deka, Madhuryya
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Devapriya, R.
- Adaptive sliding mode control with Gaussian process regression for trajectory tracking of remotely operated underwater vehicles
- Devika, E. G.
- Synthesis of Waste-Derived Nanocellulose and Its Integration with PBAT for Enhanced Performance in Sustainable Bioplastics
- Dhyan, V.
- Synthesis of Waste-Derived Nanocellulose and Its Integration with PBAT for Enhanced Performance in Sustainable Bioplastics
- Dileeplal, J.
- Circular Biohydrogen Systems: Hybrid Biological Strategies in Dark Fermentation
- Divya, N.
- Mapping Fault Tree Analysis to Artificial Neural Networks and Implementing in Google Colab
- Fazil, A.
- Assessment of Safety Margin for HAZMAT Transportation
- Francis, Delan
- Modelling human Tibio-Femoral cartilage response by FEA using simple alternative material models
- Gani, P. K. Abdul
- Recent Advances in Ceramic-Based Microbial Fuel Cells: A Comprehensive Review on Technological Developments, Performance Metrics, and Emerging Applications
- Gayatri, S. Lakshmi
- Development of a D-Limonene based Binder for Sulfur Cathodes in Lithium-Sulfur Battery
- George, Sara Sreya
- Recent Advances in Ceramic-Based Microbial Fuel Cells: A Comprehensive Review on Technological Developments, Performance Metrics, and Emerging Applications
- Gokul, H.
- Recent Advances in Ceramic-Based Microbial Fuel Cells: A Comprehensive Review on Technological Developments, Performance Metrics, and Emerging Applications
- Habid, Abdul
- Development of a Water-Soluble Bioplastic Film
- Harikrishnan, U. R.
- Structural and Vibration Analysis of a Telescopic Mast for Marine Radar Integration
- Haseena, P. V.
- Hazop and Hazid Analysis of Ammonia Barge Leaks
- Haseena, P. V.
- Adsorptive Removal and Optimization of Cu (II) Ions Using Bio-Derived Chitosan from Crustacean Shells: A Response Surface Methodology Approach
- Hemanandh, J.
- Shock Flow Behavior and Shock Management Over Supersonic Wedge Shapes with Enhance Surface Features: A Comprehensive Review
- Ishan, K. Mohammed
- Structural and Vibration Analysis of a Telescopic Mast for Marine Radar Integration
- James, Anugrah
- Immobilized Nitrogen-Doped TiO₂ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- James, Nirmala Rachel
- Immobilized Nitrogen-Doped TiO₂ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- Jayan, K. Jayesh
- Process intensification in chemical reactors: An overview in the heat exchanger perspective
- John, K. Geno
- Acoustic Analysis of Supersonic Jet Impingement on Flat and Grooved Plates Using a Double Parabolic Nozzle in an Anechoic Chamber
- John, Mathew
- Comparative Study on Mechanical and Metallurgical Characteristics of Friction Welded Joints from Al 6061 and Mg AZ31B by Varying Interface Geometries
- Jose, Abin C.
- Prototyping of Screw drive In-pipe Robot for straight and curved pipe
- Koshy, Mini
- Study of the feasibility of using ANN for modelling Seismic Response of RC structures
- Krishna, R. Kamal
- Processing and Characterization of Eichhornia Crassipes Fiber Reinforced Hybrid Polymer Composites
- Krishnan, Jibi
- Peer-Review Statements
- Kumar, P. Aneesh
- Pitting Corrosion Studies of Laser Beam Welded Hot and Cold Rolled Nb-Stabilized 5A Duplex Stainless Steel
- Lijo, V.
- Numerical Analysis of Geometrically Modified Ejector Refrigeration System
- Loganathan, M. K.
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Madhusudhanan, Nithin C.
- Performance Evaluation of an Unconventional Orifice
- Mahath, C. S.
- Peer-Review Statements
- Makesh, P. M.
- Comparative Study on Mechanical and Metallurgical Characteristics of Friction Welded Joints from Al 6061 and Mg AZ31B by Varying Interface Geometries
- Makesh, P. M.
- Mechanical and Metallurgical Evaluation of Friction Welded Joints Formed with Rotating Al 6063 with Flat Interface and Al 6082 with Taper Interface
- Malavika, C. A.
- Study of the feasibility of using ANN for modelling Seismic Response of RC structures
- Maneesh, T.
- Lubricant base stock development from HDPE plastic pyrolysis oil and modified palm oil
- Manesh, K. K.
- Optimization based on visualization experiment for stir casting of Aluminium Hybrid Metal Matrix Composites
- Manesh, K. K.
- Comparative Tribological Studies of A356 Alloy and A356/5 Wt.% Sicp Composite at Low Parametric Conditions During Unidirectional and Reciprocating Contacts
- Manilal, A. M.
- Mapping Fault Tree Analysis to Artificial Neural Networks and Implementing in Google Colab
- Manilal, A. M.
- Development of a Water-Soluble Bioplastic Film
- Manoj, P. J.
- Numerical Analysis of Geometrically Modified Ejector Refrigeration System
- Mishra, Vibhor
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Mohan, Adarsh S.
- Assessment of Safety Margin for HAZMAT Transportation
- Mohan, Santhakumar
- Adaptive sliding mode control with Gaussian process regression for trajectory tracking of remotely operated underwater vehicles
- Mubarak, A. K.
- Acoustic Analysis of Supersonic Jet Impingement on Flat and Grooved Plates Using a Double Parabolic Nozzle in an Anechoic Chamber
- Mukundan, Manoj Kumar
- Modelling human Tibio-Femoral cartilage response by FEA using simple alternative material models
- Nadirsha, Faheema
- Development of a Water-Soluble Bioplastic Film
- Naduthodi, Haris
- Structural and Vibration Analysis of a Telescopic Mast for Marine Radar Integration
- Naduthodi, Haris
- Performance Evaluation of an Unconventional Orifice
- Nageswaran, Gomathi
- Immobilized Nitrogen-Doped TiO₂ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- Nair, Anjan R.
- Influence of Thixotropic Behavior on Extrusion-Based 3D Printing
- Nair, Anjan R.
- Metrological Evaluation of Surface Quality in Minimum Quantity Lubrication of AISI 52100 Steel During Turning Operations
- Nair, Praseetha P.
- Recent Advances in Ceramic-Based Microbial Fuel Cells: A Comprehensive Review on Technological Developments, Performance Metrics, and Emerging Applications
- Nair, Sujatha
- Attention-Enhanced Graph Neural Networks for Accurate Prediction of Elastic Properties in Crystalline Materials
- Nandakishore, V. B.
- Experimental Analysis of Corrosion and wear behavior of Mg 5.5 Zn Bio-implant alloy
- Nandana, K.
- Synthesis of Waste-Derived Nanocellulose and Its Integration with PBAT for Enhanced Performance in Sustainable Bioplastics
- Narayanan, Aswathi A.
- Modular Layout Design of Electric Catamaran Ferries for Inland Waterways Using Python
- Narayanan, Aswathi A.
- Structural and Vibration Analysis of a Telescopic Mast for Marine Radar Integration
- Narayanan, K. Neeraj
- Structural and Vibration Analysis of a Telescopic Mast for Marine Radar Integration
- Narayanan, Vineeth
- Comparative Study on Mechanical and Metallurgical Characteristics of Friction Welded Joints from Al 6061 and Mg AZ31B by Varying Interface Geometries
- Narayanan, Vineeth
- Mechanical and Metallurgical Evaluation of Friction Welded Joints Formed with Rotating Al 6063 with Flat Interface and Al 6082 with Taper Interface
- Nelson, Nevin
- Influence of Thixotropic Behavior on Extrusion-Based 3D Printing
- Nelson, Nevin
- Metrological Evaluation of Surface Quality in Minimum Quantity Lubrication of AISI 52100 Steel During Turning Operations
- Nishad, S.
- Development of a D-Limonene based Binder for Sulfur Cathodes in Lithium-Sulfur Battery
- Padmavathy, K. S.
- Hazop and Hazid Analysis of Ammonia Barge Leaks
- Padmavathy, K. S.
- Adsorptive Removal and Optimization of Cu (II) Ions Using Bio-Derived Chitosan from Crustacean Shells: A Response Surface Methodology Approach
- Parvathy, B.
- Development of a D-Limonene based Binder for Sulfur Cathodes in Lithium-Sulfur Battery
- Philip, Mercy Anna
- Barrier Definition and Management of Ammonia Storage Facility
- Philip, Mercy Anna
- Synthesis of Waste-Derived Nanocellulose and Its Integration with PBAT for Enhanced Performance in Sustainable Bioplastics
- Poulose, Subin
- Sensor-Integrated Automation for Maturity Detection in Ayurvedic Product Manufacturing Using Temperature and RGB Image Analysis
- Praveen, P.
- Experimental Analysis of Corrosion and wear behavior of Mg 5.5 Zn Bio-implant alloy
- Radhakrishnan, Remya
- AI-Enabled PPE Surveillance System to Enhance Safety Standards in Shipyards
- Raj, V. Prajeesh
- Pitting Corrosion Studies of Laser Beam Welded Hot and Cold Rolled Nb-Stabilized 5A Duplex Stainless Steel
- Rajan, Anju
- Janus MoWC MXene for Efficient Nitrogen Reduction: A DFT Study
- Rajan, P. Lakshmi
- Attention-Enhanced Graph Neural Networks for Accurate Prediction of Elastic Properties in Crystalline Materials