Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)

Designing and Optimization of Gear Synchronous Dual-Frequency Induction Heating Power Supply Based on ANSYS

Authors
Li Yang, Shang Yaceng, Lai Hao, Su Yichao
Corresponding Author
Li Yang
Available Online November 2019.
DOI
10.2991/pntim-19.2019.44How to use a DOI?
Keywords
Gear Quenching; Induction Heating; Sychronous Dual Frequency; Variable Pressure Ratio
Abstract

Dual-frequency induction heating technology has significant advantages over traditional single-frequency heating for gear quenching. In this paper, the absorption of gear induction heating energy is analyzed theoretically. Based on the simulation of high frequency, medium frequency and dual-frequency magnetic and thermal field with 2-mode 22-tooth gear on ANSYS, it is concluded that the uniformity of the dual-frequency induction heating power supply has obvious advantages in heating. The structure of the dual inverter bridge synchronous dual-frequency induction power supply is studied, the dual inverter bridge synchronous dual-frequency sensor parameters are optimized, and the output variable voltage ratio of 5:1 is determined to achieve the maximum load current inflow to the load.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
Series
Atlantis Highlights in Engineering
Publication Date
November 2019
ISBN
978-94-6252-829-1
ISSN
2589-4943
DOI
10.2991/pntim-19.2019.44How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Li Yang
AU  - Shang Yaceng
AU  - Lai Hao
AU  - Su Yichao
PY  - 2019/11
DA  - 2019/11
TI  - Designing and Optimization of Gear Synchronous Dual-Frequency Induction Heating Power Supply Based on ANSYS
BT  - Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
PB  - Atlantis Press
SP  - 214
EP  - 219
SN  - 2589-4943
UR  - https://doi.org/10.2991/pntim-19.2019.44
DO  - 10.2991/pntim-19.2019.44
ID  - Yang2019/11
ER  -