Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)

<Previous Article In Volume
Next Article In Volume>

Research on Laval Nozzle and Overall Simulation Analysis Based on High Speed Precision Air Bearing Spindle Pneumatic Turbine System

Authors
Du Xi, Fang Zhou, Liu Bo, Zhang Jun-an
Corresponding Author
Du Xi
Available Online November 2019.
DOI
10.2991/pntim-19.2019.43How to use a DOI?
Keywords
Laval Nozzle; Cross Section Ratio; CFD
Abstract

Laval nozzles for important component in high-speed precision air-floating spindle gas drive systems, to establish a cross-sectional ratio is calculated by analysis of their simplified model of the two stages. Use of computational fluid dynamics (CFD) to simulate the Structural parameters of Laval nozzle-- pneumatic turbine and analyzed the gas flow and flow rate. The simulation results show that the airflow impinges on the turbine blades and then flows out to the surroundings. The gas flow is accelerated in the Laval nozzle, reaching a maximum at the outlet, and the dynamic pressure in the Laval nozzle is high, reaching a maximum at the nozzle outlet. The simplified Laval nozzle model meets the design requirements. Then the article analyzes the problems in the model simplification and lays the foundation for the subsequent engineering experiments

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
Series
Atlantis Highlights in Engineering
Publication Date
November 2019
ISBN
10.2991/pntim-19.2019.43
ISSN
2589-4943
DOI
10.2991/pntim-19.2019.43How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

risenwbib
TY  - CONF
AU  - Du Xi
AU  - Fang Zhou
AU  - Liu Bo
AU  - Zhang Jun-an
PY  - 2019/11
DA  - 2019/11
TI  - Research on Laval Nozzle and Overall Simulation Analysis Based on High Speed Precision Air Bearing Spindle Pneumatic Turbine System
BT  - Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019)
PB  - Atlantis Press
SP  - 209
EP  - 213
SN  - 2589-4943
UR  - https://doi.org/10.2991/pntim-19.2019.43
DO  - 10.2991/pntim-19.2019.43
ID  - Xi2019/11
ER  -