Proceedings of the 2nd International Conference on Modelling, Identification and Control

Study of Numerical Method of Synthetical Surface Heat Transfer Coefficient on Rail during Spraying Process

Authors
Li Ge, Liu Zhimin
Corresponding Author
Li Ge
Available Online August 2015.
DOI
10.2991/mic-15.2015.34How to use a DOI?
Keywords
-Numerical method, Synthetical heat transfer coefficient, Rail
Abstract

In order to get precise synthetical heat transfer coefficients, the synthetical surface heat transfer coefficients on rail are calculated respectively by Two-point method, Three-point method and Whole method during spraying process, taken into the calculation model to get the cooling curve to compare with the experimental value. The cooling curve got from the synthetical heat transfer coefficient calculated by the Whole method is close to the experimental value and in line with actual situation

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2nd International Conference on Modelling, Identification and Control
Series
Advances in Intelligent Systems Research
Publication Date
August 2015
ISBN
978-94-62520-99-8
ISSN
1951-6851
DOI
10.2991/mic-15.2015.34How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Li Ge
AU  - Liu Zhimin
PY  - 2015/08
DA  - 2015/08
TI  - Study of Numerical Method of Synthetical Surface Heat Transfer Coefficient on Rail during Spraying Process
BT  - Proceedings of the 2nd International Conference on Modelling, Identification and Control
PB  - Atlantis Press
SP  - 155
EP  - 158
SN  - 1951-6851
UR  - https://doi.org/10.2991/mic-15.2015.34
DO  - 10.2991/mic-15.2015.34
ID  - Ge2015/08
ER  -