Proceedings of the 2015 International Conference on Management, Education, Information and Control

<Previous Article In Volume
Next Article In Volume>

Car Inside Beam Enhanced Cold Stamping Mould Design

Authors
Quanzhong Jia
Corresponding Author
Quanzhong Jia
Available Online June 2015.
DOI
10.2991/meici-15.2015.86How to use a DOI?
Keywords
Stamping; Drawing die; Main structure; Design; Mold
Abstract

This paper is on the study of cold stamping drawing die of a vehicle inner beam enhanced. Firstly, it determines the stamping parts process plan. Then it draws the die design, including the design of the main structure of the mold design and mold auxiliary parts. Finally, it analyzes the die working principle and carries on the summary to this design.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2015 International Conference on Management, Education, Information and Control
Series
Advances in Intelligent Systems Research
Publication Date
June 2015
ISBN
10.2991/meici-15.2015.86
ISSN
1951-6851
DOI
10.2991/meici-15.2015.86How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

risenwbib
TY  - CONF
AU  - Quanzhong Jia
PY  - 2015/06
DA  - 2015/06
TI  - Car Inside Beam Enhanced Cold Stamping Mould Design
BT  - Proceedings of the 2015 International Conference on Management, Education, Information and Control
PB  - Atlantis Press
SP  - 486
EP  - 490
SN  - 1951-6851
UR  - https://doi.org/10.2991/meici-15.2015.86
DO  - 10.2991/meici-15.2015.86
ID  - Jia2015/06
ER  -