The Non-linear Chromatic Compensation of the Fixed Length Fiber’s Spectral Attenuation with the Fourier Transform

DOI

10.2991/mce-14.2014.96How to use a DOI?

Keywords

optical fiber probe;spectral attenuation; the Fourier Transform; Chromatic Compensation; chromatic coordinate

Abstract

In the chromatic measuring system, a kind of optical fiber probe was added to collect the light to decrease the interference to the reflected light from the object. But the probe brings the distortion to the system in the chromatic measurement. This paper put forward a method based on the Fourier Transform to compensate the non-linear attenuation of the fixed length optical fiber. In the scope of visible light, with a series of experiments, an adjustable function for the optical fiber probe is obtained. Using this adjustable function, the error of fiber-optic transmission can be lowed less than 1%. At the same time, the chromatic coordinate was tested with the fiber probe and without the probe. The error of the chromatic coordinate is below 0.01, and it meets the international standard criteria in chromatic measurement. It is proved that this method is suitable for compensating of the fixed length optical fiber’s chromatic compensation.

Copyright

© 2014, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Xianjiang Meng
AU  - Xianli Meng
PY  - 2014/03
DA  - 2014/03
TI  - The Non-linear Chromatic Compensation of the Fixed Length Fiber’s Spectral Attenuation with the Fourier Transform
BT  - Proceedings of the 2014 International Conference on Mechatronics, Control and Electronic Engineering
PB  - Atlantis Press
SP  - 433
EP  - 437
SN  - 1951-6851
UR  - https://doi.org/10.2991/mce-14.2014.96
DO  - 10.2991/mce-14.2014.96
ID  - Meng2014/03
ER  -