Proceedings of the 2014 International Conference on Mechatronics, Control and Electronic Engineering

Measuring Model of Cylindrical Workpiece

Authors
Kuijing Zheng, Fei Xu
Corresponding Author
Kuijing Zheng
Available Online March 2014.
DOI
10.2991/mce-14.2014.34How to use a DOI?
Keywords
cylindrical workpiece;vision measuring; camera model; mathematical modeling; three-dimensional measuring
Abstract

Objective:The three-dimensional reconstruction method based on vision uses the digital camera as the image sensor. Establishing the model of a dynamic measured object is the premise of the vision precise measuring system. Methods: By using the pinhole camera model and the mathematical modeling method, the three-dimensional reconstruction of the measured part can be completed quickly based on the known measured objects. The corresponding relation can be realized accurately and automatically on condition that the object's shape characteristic is known clearly. The algorithm of the three-dimensional measuring model of cylindrical workpiece can be established conveniently. Results: The algorithms are verified by simulation with Solidworks and Matlab. The correctness of the algorithm is validated by actual experiment and the absolute error is less than 0.015mm or the relative error is less than 0.1%. Conclusion: The measuring results are accurate enough to satisfy the practical requirement of fast and precise measuring in industrial field.

Copyright
© 2014, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2014 International Conference on Mechatronics, Control and Electronic Engineering
Series
Advances in Intelligent Systems Research
Publication Date
March 2014
ISBN
10.2991/mce-14.2014.34
ISSN
1951-6851
DOI
10.2991/mce-14.2014.34How to use a DOI?
Copyright
© 2014, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Kuijing Zheng
AU  - Fei Xu
PY  - 2014/03
DA  - 2014/03
TI  - Measuring Model of Cylindrical Workpiece
BT  - Proceedings of the 2014 International Conference on Mechatronics, Control and Electronic Engineering
PB  - Atlantis Press
SP  - 156
EP  - 159
SN  - 1951-6851
UR  - https://doi.org/10.2991/mce-14.2014.34
DO  - 10.2991/mce-14.2014.34
ID  - Zheng2014/03
ER  -