Proceedings of the 2014 International Conference on Mechatronics, Control and Electronic Engineering

Simulation and Research on Response Characteristic of Optical Fiber Probe Sensor of Void Fraction Measurement Based on Zemax

Authors
Lingfu Kong, Weihang Kong, Na Xie, Yingwei Li
Corresponding Author
Lingfu Kong
Available Online March 2014.
DOI
10.2991/mce-14.2014.19How to use a DOI?
Keywords
Optical fiber probe sensor; Void fraction; Response characteristic; Signal threshold processing; Zemax simulation
Abstract

In view of the void fraction measurement problem of oil-gas-water three phase flow in oil production logging, in this thesis, optical fiber probe sensor is used to measure the cross-sectional local void fraction. In order to analysis post-treatment raw probe signal preferably and more reasonable, firstly, the characteristic of optical fiber probe pierced bubble is analyzed and simulated by the simulation modeling with ZEMAX, and adopting non-sequential ray tracing method to simulate the track characteristic of the light energy variation in the sensing system, which both from the different horizontal radial positions of probe pierced bubble and different axial positions of the probe; Then, in order to get the accurate local void fraction information, gas-phase distribution features in fluid pipeline and flow regime identification of multiphase flow, the transformation of binary value signal in probe signal post-processing is analyzed and compared by different threshold methods. Finally, the experimental platform of void fraction measurement is built to obtain the probe raw signal of oil-gas-water three-phase which total flow is 30m3/d, and the effects of different threshold method are confirmed.

Copyright
© 2014, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2014 International Conference on Mechatronics, Control and Electronic Engineering
Series
Advances in Intelligent Systems Research
Publication Date
March 2014
ISBN
978-94-62520-31-8
ISSN
1951-6851
DOI
10.2991/mce-14.2014.19How to use a DOI?
Copyright
© 2014, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Lingfu Kong
AU  - Weihang Kong
AU  - Na Xie
AU  - Yingwei Li
PY  - 2014/03
DA  - 2014/03
TI  - Simulation and Research on Response Characteristic of Optical Fiber Probe Sensor of Void Fraction Measurement Based on Zemax
BT  - Proceedings of the 2014 International Conference on Mechatronics, Control and Electronic Engineering
PB  - Atlantis Press
SP  - 89
EP  - 93
SN  - 1951-6851
UR  - https://doi.org/10.2991/mce-14.2014.19
DO  - 10.2991/mce-14.2014.19
ID  - Kong2014/03
ER  -