Experimental study on impact of installation angle on heat transfer performance of spray cooling

DOI

10.2991/lemcs-14.2014.58How to use a DOI?

Keywords

spray cooling; electronic structure design; experimental study; heat exchange design

Abstract

The spray cooling technology has great advantage in high heat flux removal. Because the heat transfer of spray cooling has much to do with the heater surface temperature, it is important to ensure that the entire heating surface temperature is in an effective operating range. Otherwise, excessive local temperature may threaten the normal operation of spray cooling. In this paper, experimental method was used to investigate the effect of installation angle of spray cooling on the heat transfer performance. The five installation angles tested in this study were 0°, 45°, 90°, 135° and 180°. Other experimental parameters remain constant, such as the flow rate, the spray height and the spray pressure. The results show the heat flux as a function of surface temperature with various installation angles in a graphical format

Copyright

© 2014, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Liping Pang
AU  - Yu Zhang
AU  - Zhixuan Liu
AU  - Shicheng Jin
AU  - Yibin Ji
PY  - 2014/05
DA  - 2014/05
TI  - Experimental study on impact of installation angle on heat transfer performance of spray cooling
BT  - Proceedings of the International Conference on Logistics, Engineering, Management and Computer Science
PB  - Atlantis Press
SP  - 250
EP  - 253
SN  - 1951-6851
UR  - https://doi.org/10.2991/lemcs-14.2014.58
DO  - 10.2991/lemcs-14.2014.58
ID  - Pang2014/05
ER  -