Proceedings of the 2015 Joint International Mechanical, Electronic and Information Technology Conference

Power Cable Structure Recovery and Application Based on Mould Melt Joint

Authors
Haijie Zhong, Yunjie Xia, Jinming Wang, Hong Huang, Zhenjie Liang
Corresponding Author
Haijie Zhong
Available Online December 2015.
DOI
10.2991/jimet-15.2015.156How to use a DOI?
Keywords
mould melt joint, power cable, structure recovery
Abstract

Many failures of power cable system expose that power cable accessories are the main weak point because of frequently poor workmanship and low-quality when installed on-site. That introduces a question that could we use another method to reduce power cable accessories failures rate. Mould Melt Joint (MMJ) is the new method to fully restore original cable body structure on the cable joints in the field, so that the electrical properties of the connection of cable and MMJ and the cable body equalization reach a high-security state. The technique has obvious technical advantages compared with traditional power cable joint. MMJ specification is almost equal to power cable outer diameter, which will occupy less space than traditional power cable accessories and could be applied in occasion such as sinuosity and high-altitude. Mould Melt Joint has been applied in many occasions with good effect, indicating a good application prospect.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 Joint International Mechanical, Electronic and Information Technology Conference
Series
Advances in Computer Science Research
Publication Date
December 2015
ISBN
10.2991/jimet-15.2015.156
ISSN
2352-538X
DOI
10.2991/jimet-15.2015.156How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Haijie Zhong
AU  - Yunjie Xia
AU  - Jinming Wang
AU  - Hong Huang
AU  - Zhenjie Liang
PY  - 2015/12
DA  - 2015/12
TI  - Power Cable Structure Recovery and Application Based on Mould Melt Joint
BT  - Proceedings of the 2015 Joint International Mechanical, Electronic and Information Technology Conference
PB  - Atlantis Press
SP  - 837
EP  - 841
SN  - 2352-538X
UR  - https://doi.org/10.2991/jimet-15.2015.156
DO  - 10.2991/jimet-15.2015.156
ID  - Zhong2015/12
ER  -