Proceedings of the 9th Joint International Conference on Information Sciences (JCIS-06)

An Effective Drilling Wear Measurement based on Visual Inspection Technique

Authors
Yu-Teng Liang1, Yih-Chih Chiou
1Department of Automation Engineering Ta-Hwa Institute of Tec
Corresponding Author
Yu-Teng Liang
Available Online October 2006.
DOI
10.2991/jcis.2006.267How to use a DOI?
Keywords
Visual Inspection, Different Coated Drilling, Tool Wear, Machine Vision, dry cutting.
Abstract

The purpose of this research is to use the visual inspection technique for the automatic tool wear measurement of different coated drills. The tool wear images with the different coated drilling are captured using a machine vision system incorporating with an effective vertex detection algorithm based on subpixel edge detector and Gaussian filter is presented. The results show that the proposed algorithm is an effective method for the different coated drilling factor is recognized to make the most significant contribution to the over all performance. All drilling tests were carried out under dry cutting conditions without any coolant being used, The TiAlN-coated drilling has the least wear rate amongst these coated drilling cutters and has the longest tool life in this experiment.

Copyright
© 2006, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 9th Joint International Conference on Information Sciences (JCIS-06)
Series
Advances in Intelligent Systems Research
Publication Date
October 2006
ISBN
978-90-78677-01-7
ISSN
1951-6851
DOI
10.2991/jcis.2006.267How to use a DOI?
Copyright
© 2006, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yu-Teng Liang
AU  - Yih-Chih Chiou
PY  - 2006/10
DA  - 2006/10
TI  - An Effective Drilling Wear Measurement based on Visual Inspection Technique
BT  - Proceedings of the 9th Joint International Conference on Information Sciences (JCIS-06)
PB  - Atlantis Press
SN  - 1951-6851
UR  - https://doi.org/10.2991/jcis.2006.267
DO  - 10.2991/jcis.2006.267
ID  - Liang2006/10
ER  -