Proceedings of the 6th International Workshop of Advanced Manufacturing and Automation

ADAMS and ANSYS based Mechanism Optimization of Multifunctional Sprayer and Performance Test

Authors
Xinxue Zhao, Xuemei Liu, Jin Yuan, Rongkang Chen
Corresponding Author
Xinxue Zhao
Available Online November 2016.
DOI
https://doi.org/10.2991/iwama-16.2016.32How to use a DOI?
Keywords
multifunctional sprayer, mechanism optimize, modal analysis, finite element analysis, dynamic simulation
Abstract
For significant differences in plant morphology at different growth stage after tobacco transplanting, using single boom sprayer leads to poor disease and pest control. This paper designed a multifunctional sprayer, to conduct boom spray to seedling stage, and to conduct tunnel spray to maturity stage. First introduced the overall structure of the sprayer, applied ANSYS modal analysis technology to optimize the deformation mechanism, and combined with ADAMS dynamic simulation to verify the reliability of the design. Then according to the designed parameters, the sprayer prototype was built. Modal test of deformation mechanism and field test of sprayer were carried out. Modal test showed that the first natural frequency of deformation mechanism was 9.8Hz after optimization, the deviation of frequency between analysis and modal test was less than 10%. Field test showed in seedling and maturity stage of tobacco prototype's working efficiency was closed to 1.225 and 0.687hm2/h, leaves liquid coverage reached 89.7% and 92.8% respectively, and almost no damage to tobacco leaves.
Open Access
This is an open access article distributed under the CC BY-NC license.

Download article (PDF)

Proceedings
6th International Workshop of Advanced Manufacturing and Automation
Part of series
Advances in Economics, Business and Management Research
Publication Date
November 2016
ISBN
978-94-6252-243-5
ISSN
2352-5428
DOI
https://doi.org/10.2991/iwama-16.2016.32How to use a DOI?
Open Access
This is an open access article distributed under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Xinxue Zhao
AU  - Xuemei Liu
AU  - Jin Yuan
AU  - Rongkang Chen
PY  - 2016/11
DA  - 2016/11
TI  - ADAMS and ANSYS based Mechanism Optimization of Multifunctional Sprayer and Performance Test
BT  - 6th International Workshop of Advanced Manufacturing and Automation
PB  - Atlantis Press
SP  - 175
EP  - 178
SN  - 2352-5428
UR  - https://doi.org/10.2991/iwama-16.2016.32
DO  - https://doi.org/10.2991/iwama-16.2016.32
ID  - Zhao2016/11
ER  -