Proceedings of the International Symposium "Engineering and Earth Sciences: Applied and Fundamental Research" dedicated to the 85th anniversary of H.I. Ibragimov (ISEES 2019)

Development of Antifriction Materials Based on Polytetrafluoroethylene Filled with Binary Fillers

Authors
A.P. Vasilev, T.S. Struchkova, A.A. Okhlopkova, A.G. Alekseev
Corresponding Author
A.P. Vasilev
Available Online August 2019.
DOI
10.2991/isees-19.2019.66How to use a DOI?
Keywords
PTFE; polymer composite materials; carbon fiber; UPTFE; physico-mechanical characteristics; wear; coefficient of friction.
Abstract

The paper presents the results of the study of polymer composite materials (PCM) based on polytetrafluoroethylene (PTFE) filled with carbon fibers (CF) and ultrafine polytetrafluoroethylene (UPTFE). Physic-mechanical and tribological characteristics of PTFE based polymer composite materials containing 1-10 wt.% CF+1 wt.% UPTFE have been studied. Simultaneous introduction of carbon fibers and UPTFE in PTFE causes the deformation-strength characteristics to remain at the level of those of the polymer matrix regardless of the CF content. Increased content of carbon fibers in UPTFE increases the stress during compression and decreases the PCM density. Wear resistance increases up to 310 fold, and the coefficient of friction of polymer composites decreases by 17-19% compared to that of the initial polymer. The results of the study of polymer composites by XRD analysis and scanning electron microscopy are presented. Introduction of fillers in PTFE changes the supramolecular structure, which is followed by an increased degree of crystallinity. The developed materials are promising for use in friction units of machinery and equipment.

Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Symposium "Engineering and Earth Sciences: Applied and Fundamental Research" dedicated to the 85th anniversary of H.I. Ibragimov (ISEES 2019)
Series
Atlantis Highlights in Material Sciences and Technology
Publication Date
August 2019
ISBN
978-94-6252-769-0
ISSN
2590-3217
DOI
10.2991/isees-19.2019.66How to use a DOI?
Copyright
© 2019, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - A.P. Vasilev
AU  - T.S. Struchkova
AU  - A.A. Okhlopkova
AU  - A.G. Alekseev
PY  - 2019/08
DA  - 2019/08
TI  - Development of Antifriction Materials Based on Polytetrafluoroethylene Filled with Binary Fillers
BT  - Proceedings of the International Symposium "Engineering and Earth Sciences: Applied and Fundamental Research" dedicated to the 85th anniversary of H.I. Ibragimov (ISEES 2019)
PB  - Atlantis Press
SP  - 487
EP  - 491
SN  - 2590-3217
UR  - https://doi.org/10.2991/isees-19.2019.66
DO  - 10.2991/isees-19.2019.66
ID  - Vasilev2019/08
ER  -