The Feasibility of Conventional Beamforming Algorithm Based on Resolution for Internet of Things in Millimeter Wave Environment

DOI

10.2991/isct-16.2016.25How to use a DOI?

Keywords

Millimeter wave;Beamforming;IoT

Abstract

With the densification of Internet of Things (IoT), the IoT application will benefit a lot from a wide range of unused bandwidths Millimeter wave (mm wave) frequencies. Through the general theoretical background, this paper puts forward several conventional beamforming algorithms in the mm wave environment, and analyzes the feasibility of these algorithms based on resolution by simulation. It is found that considering the position deviation of the virtual antenna array in M2M communication, the main lobe of the CBF, MVDR, LMS, MUSIC algorithm obtains the maximum value in the DOA, while the beam pattern of the CBF, MVDR, LMS algorithms have a large deviation from the directions except DOA. The beam pattern of MUSIC algorithm is almost the same as the expected response of the uniform array. The simulation results show that MUSIC algorithm can be used in the mm wave environment of high-performance IoT communication.

Copyright

© 2016, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Yuehong Guo
AU  - Lixin Li
AU  - Xiaocong Wen
AU  - Ang Gao
AU  - Yatai Liu
PY  - 2016/12
DA  - 2016/12
TI  - The Feasibility of Conventional Beamforming Algorithm Based on Resolution for Internet of Things in Millimeter Wave Environment
BT  - Proceedings of the 4th International Conference on Information Systems and Computing Technology
PB  - Atlantis Press
SP  - 147
EP  - 152
SN  - 2352-538X
UR  - https://doi.org/10.2991/isct-16.2016.25
DO  - 10.2991/isct-16.2016.25
ID  - Guo2016/12
ER  -