Proceedings of the International Joint Conference on Science and Engineering 2021 (IJCSE 2021)

Heating System Performance in Oil Cooler Capacity Testing Design

Authors
Handini Novita Sari1, *, I Made Arsana1, Tri Darma Setiawan1, Novi Sukma Drastiawati1, Mochamad Cholik1, Soeryanto1
1Mechanical Engineering Department, Universitas Negeri Surabaya, Surabaya, Indonesia
*Corresponding author. Email: handinisari@unesa.ac.id
Corresponding Author
Handini Novita Sari
Available Online 16 December 2021.
DOI
10.2991/aer.k.211215.122How to use a DOI?
Keywords
Heater; Heating System; Oilcooler; Temperature; Capacity
Abstract

Cooling a vehicle is a very important thing, the goal is not to overheat the engine. Along with advances in vehicle engine cooling technology, there are several types such as radiators and oil coolers, but studies that explain engine cooling, especially on oil coolers, are still lacking. In this study, we will discuss the planning of the heating system in the design of the oil cooler capacity tester. The testing process is carried out by measuring using temperatures of 40°C, 50°C, 60°C, 70°C, 80°C, 90°C and an outside temperature (room temperature) of T∞ = 300C with a pressure of 1 atm and a heating system that using 2 heaters with 600 watts of power, taking 3 times with a time lag of 1 day. Based on the results of testing the heating system on the oil cooler capacity tester, it can increase the temperature and takes time with the following data: the first 40° temperature increase takes 4 minutes 48 seconds, the second 50° temperature increase takes 3 minutes 18 seconds, the third temperature rise to 60° takes 3 minutes 40 seconds, the fourth temperature rise to 70° takes 3 minutes 25 seconds, the fifth temperature rise to 80° takes 3 minutes 02 seconds, the sixth temperature rise to 90° takes 3 minute 04 seconds. The results that have been achieved in terms of heating the fluid in the tank can heat well up to a temperature of 90° and there are no problems whatsoever.

Copyright
© 2021 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Download article (PDF)

Volume Title
Proceedings of the International Joint Conference on Science and Engineering 2021 (IJCSE 2021)
Series
Advances in Engineering Research
Publication Date
16 December 2021
ISBN
978-94-6239-486-5
ISSN
2352-5401
DOI
10.2991/aer.k.211215.122How to use a DOI?
Copyright
© 2021 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Handini Novita Sari
AU  - I Made Arsana
AU  - Tri Darma Setiawan
AU  - Novi Sukma Drastiawati
AU  - Mochamad Cholik
AU  - Soeryanto
PY  - 2021
DA  - 2021/12/16
TI  - Heating System Performance in Oil Cooler Capacity Testing Design
BT  - Proceedings of the International Joint Conference on Science and Engineering 2021 (IJCSE 2021)
PB  - Atlantis Press
SP  - 732
EP  - 738
SN  - 2352-5401
UR  - https://doi.org/10.2991/aer.k.211215.122
DO  - 10.2991/aer.k.211215.122
ID  - Sari2021
ER  -