Proceedings of the 2015 International Forum on Energy, Environment Science and Materials

The Optimization for 2D-CD Nozzle Considering Both Aerodynamics and Geometry

Authors
Yaxiong Zhu, Qiang Wang, Haiyang Hu
Corresponding Author
Yaxiong Zhu
Available Online September 2015.
DOI
10.2991/ifeesm-15.2015.155How to use a DOI?
Keywords
2D-CD nozzle; internal performance; circular-to-rectangular transition duct length;optimization.
Abstract

To master internal performance and design method of 2D-CD nozzle,the internal performance of 2D-CD nozzle was investigated by numerical simulation method.The influence of circular-to-rectangular transition duct outlet area to inlet area ratio and circular-to-rectangular transition duct length on the internal performance of 2D-CD nozzle were analyzed.The results show that a small change in internal performance happens as circular-to-rectangular transition duct outlet area to intlet area ratio decreases.Because a smaller outlet area needs a shorter convergent flap length,thus the nozzle design can be optimized in length and weight aspect.And as the circular-to-rectangular transition duct length decreases,only a little loss in internal performance is obtained.Thus the whole length and weight of nozzle can be optimized at the cost of a little loss in internal performance.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 International Forum on Energy, Environment Science and Materials
Series
Advances in Engineering Research
Publication Date
September 2015
ISBN
978-94-6252-117-9
ISSN
2352-5401
DOI
10.2991/ifeesm-15.2015.155How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yaxiong Zhu
AU  - Qiang Wang
AU  - Haiyang Hu
PY  - 2015/09
DA  - 2015/09
TI  - The Optimization for 2D-CD Nozzle Considering Both Aerodynamics and Geometry
BT  - Proceedings of the 2015 International Forum on Energy, Environment Science and Materials
PB  - Atlantis Press
SP  - 835
EP  - 839
SN  - 2352-5401
UR  - https://doi.org/10.2991/ifeesm-15.2015.155
DO  - 10.2991/ifeesm-15.2015.155
ID  - Zhu2015/09
ER  -