Tool path planning in milling of repaired blades of blisks

DOI

10.2991/ifeesd-16.2016.135How to use a DOI?

Keywords

Blisks, Repaired blade, Repairing and machining, Tool path planning; Machining allowance

Abstract

A tool path planning approach is proposed in this paper to machine repaired blades of blisks in rough and finish milling. Measured allowances on the blank of the repaired blade are first analyzed with the measured point data. With respect to the non-uniform allowance on the blank, the cutting region for rough milling is determined and tool path planning is conducted based on the proposed iso-stepover method. The cutting region for finish milling is then determined to guarantee that the cutting region can be smoothly connected to the non-cutting region. Finally, a tool path modification method is proposed when the transition region is included.

Copyright

© 2016, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Yazhou Feng
AU  - Junxue Ren
AU  - Yingying Xu
PY  - 2016/05
DA  - 2016/05
TI  - Tool path planning in milling of repaired blades of blisks
BT  - Proceedings of the 2016 International Forum on Energy, Environment and Sustainable Development
PB  - Atlantis Press
SP  - 739
EP  - 744
SN  - 2352-5401
UR  - https://doi.org/10.2991/ifeesd-16.2016.135
DO  - 10.2991/ifeesd-16.2016.135
ID  - Feng2016/05
ER  -