Proposal Improvement to Increase Equipment Effectiveness and Reduse Waste Levels in SME Plastic Straw Prodecer with a Total Productive Maintenance Approach and Waste Assessment Model
- DOI
- 10.2991/aer.k.211222.031How to use a DOI?
- Keywords
- Total Productive Maintenance (TPM); Overall Equipment Effectiveness (OEE); Six Big Losses; Waste Assessment Model (WAM)
- Abstract
The existence of waste in a production line causes production equipment and production systems to be ineffective and inefficient. It’s the same with an SME that produces plastic straw products in a city in Indonesia. BNL50 machine that produces plactic straw, often experiences problems such as breakdowns and minor stoppages. Thus, the amount of total production is low and the delivery of customer orders is often delayed. The purpose of this study was to give improvement proposed to the company based on the equipment effectiveness and the significant waste. The method that used in this study is Total Productive Maintenance approach using Overall Equipment Effectiveness (OEE) and Six Big Losses, as well as identification of the most dominant waste in the production line using the Waste Assessment Model (WAM). The average value of the effectiveness of the BNL50 machine for four months calculated by OEE is 87.40% with reduced speed losses as the highest losses value which causes the low OEE value. With the WAM method, the highest value were found, that is waiting. Suggestions for improvement given to the SME company is implementing 5S and the pillars of TPM as well as making SOPs for operator training, material mixing composition, and machine hygiene standards.
- Copyright
- © 2021 The Authors. Published by Atlantis Press International B.V.
- Open Access
- This is an open access article under the CC BY-NC license.
Cite this article
TY - CONF AU - Shanya Dekrita Jauza AU - Indro Prakoso AU - Ayu Anggraeni Sibarani PY - 2021 DA - 2021/12/23 TI - Proposal Improvement to Increase Equipment Effectiveness and Reduse Waste Levels in SME Plastic Straw Prodecer with a Total Productive Maintenance Approach and Waste Assessment Model BT - Proceedings of the International Conference on Science and Engineering (ICSE-UIN-SUKA 2021) PB - Atlantis Press SP - 186 EP - 193 SN - 2352-5401 UR - https://doi.org/10.2991/aer.k.211222.031 DO - 10.2991/aer.k.211222.031 ID - Jauza2021 ER -