Proceedings of the 2nd International Conference on Railway and Transportation 2023 (ICORT 2023)

<Previous Article In Volume
Next Article In Volume>

Variation of Friction Stir Welding Chisel Radius Pin on Tensile Strength of Aluminum 6061

Authors
Henry Widya Prasetya1, *, Damar Isti Pratiwi1, Dimas Adi Perwira1, Saddam Miftahudin1
1Railway Mechanical Technology, Politeknik Perkeretaapian Indonesia, Madiun, Indonesia
*Corresponding author. Email: henry@ppi.ac.id
Corresponding Author
Henry Widya Prasetya
Available Online 20 February 2024.
DOI
10.2991/978-94-6463-384-9_32How to use a DOI?
Keywords
Aluminium 6061; Friction Stir Welding; Tensile Strength; Pin Radius
Abstract

Aluminum 6061 is a material that is widely used in the railway manufacturing industry. Friction Stir Welding (FSW) is a solid-state welding method without the addition of filler metal. FSW utilizes heat between the rotating tool and the gripped workpiece so that the heat generated is soften and melt the base metal. This study aims to make a friction stir welding chisel with a variation of pin radius (3 mm, 4 mm, 5 mm) and determine the tensile strength of the FSW welded joint. From the results of tests carried out after the welding process, it could be concluded that the best connection quality obtained from the welding process was 3 mm with an average tensile strength value of 210,056 Mpa, while the lowest average tensile strength was obtained on welding results using a pin radius variation of 5 mm with tensile strength value of 146,356 MPa. This was due to weld flash which could cause a decrease in tensile strength when using a 3 mm pin variation less than using a 4 mm and 5 mm pin variation.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2nd International Conference on Railway and Transportation 2023 (ICORT 2023)
Series
Advances in Engineering Research
Publication Date
20 February 2024
ISBN
10.2991/978-94-6463-384-9_32
ISSN
2352-5401
DOI
10.2991/978-94-6463-384-9_32How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Henry Widya Prasetya
AU  - Damar Isti Pratiwi
AU  - Dimas Adi Perwira
AU  - Saddam Miftahudin
PY  - 2024
DA  - 2024/02/20
TI  - Variation of Friction Stir Welding Chisel Radius Pin on Tensile Strength of Aluminum 6061
BT  - Proceedings of the 2nd International Conference on Railway and Transportation 2023 (ICORT 2023)
PB  - Atlantis Press
SP  - 361
EP  - 368
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-384-9_32
DO  - 10.2991/978-94-6463-384-9_32
ID  - Prasetya2024
ER  -