Proceedings of the ICON ARCCADE 2021: The 2nd International Conference on Art, Craft, Culture and Design (ICON-ARCCADE 2021)

Rapid Prototyping as an Experimentation Method of Designing Tools to Improve the Quality and Variety of Stitch-Resist Dyed Motifs

Authors
Bintan Titisari1, *, Slamet Riyadi2
1Institut Teknologi Bandung, Indonesia
2Institut Teknologi Bandung, Indonesia
*Corresponding author. Email: bintan.titisari@office.itb.ac.id
Corresponding Author
Bintan Titisari
Available Online 28 December 2021.
DOI
10.2991/assehr.k.211228.021How to use a DOI?
Keywords
stitch-resist dyeing; textile patterns; appropriate technology; rapid prototyping; sustainable material
Abstract

This paper discusses initial findings from an ongoing research project that designing a tool to improve the quality and variety of stitch-resist dyed motifs in Indonesia. Stitch-resist dyeing technique has been used to produce Indonesian traditional cloths, such as Jumputan cloth, Tritik cloth, Pelangi cloth and Sasirangan cloth. In the past 30 years, the use of this technique has been transformed from producing an individual artwork to mass craft production. Although the transformation provides economic benefits for the craft makers, an issue had been raised about the decreasing motif quality and the increasing number of defect patterns. Designing a stopper tool using the rapid prototyping method with biodegradable materials can be one of the alternatives to improve the quality and variety of motifs. The tool would increase the resist area which has been done manually by knotting the sewing thread after it is pulled. The resist area prevents the dye liquid from entering the area which eventually forms a pattern at the end of this process. The method used in this study used an experimentation approach with rapid prototyping method using Fused Deposition Modeling (FDM) based 3D printer. The biodegradable material focuses on the use of Polylactic Acid (PLA), made from corn with a low environmental impact. At this stage, the research is still an ongoing process and the validating stage had not been conducted, although the final design of the prototyping tool had been done. The prototype is expected to solve the production issue of the stitch-resist dyeing technique by producing more precise and consistent pressure compared to manual knots without changing the existent culture among Indonesian craft makers. The further works are to analyze the effect of using the tool on the stitch-resist dyeing process and how it will affect the resultant motifs

Copyright
© 2021 The Authors. Published by Atlantis Press SARL.
Open Access
This is an open access article under the CC BY-NC license.

Download article (PDF)

Volume Title
Proceedings of the ICON ARCCADE 2021: The 2nd International Conference on Art, Craft, Culture and Design (ICON-ARCCADE 2021)
Series
Advances in Social Science, Education and Humanities Research
Publication Date
28 December 2021
ISBN
978-94-6239-501-5
ISSN
2352-5398
DOI
10.2991/assehr.k.211228.021How to use a DOI?
Copyright
© 2021 The Authors. Published by Atlantis Press SARL.
Open Access
This is an open access article under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Bintan Titisari
AU  - Slamet Riyadi
PY  - 2021
DA  - 2021/12/28
TI  - Rapid Prototyping as an Experimentation Method of Designing Tools to Improve the Quality and Variety of Stitch-Resist Dyed Motifs
BT  - Proceedings of the ICON ARCCADE 2021: The 2nd International Conference on Art, Craft, Culture and Design (ICON-ARCCADE 2021)
PB  - Atlantis Press
SP  - 173
EP  - 178
SN  - 2352-5398
UR  - https://doi.org/10.2991/assehr.k.211228.021
DO  - 10.2991/assehr.k.211228.021
ID  - Titisari2021
ER  -