Proceedings of the 2015 3rd International Conference on Machinery, Materials and Information Technology Applications

Effects of high pressure heat treatment on mechanical and sliding wear properties of Cr phase in Cu51.36Cr48.64 alloy

Authors
Jinzhu Zhao, Shengxue Yu
Corresponding Author
Jinzhu Zhao
Available Online November 2015.
DOI
10.2991/icmmita-15.2015.271How to use a DOI?
Keywords
Cu51.36Cr48.64 alloy; high pressure heat treatment; Cr phase; mechanical property; wear property.
Abstract

Cu51.36Cr48.64 alloy was treated at 940? for 15min under different pressures, the Cr phase in Cu51.36Cr48.64 alloy was observed by optical microscope, scanning electron microscope and transmission electron microscopy, and its mechanical and sliding wear properties were measured by means of nanoindenter and micro-hardness tester, the effects of high pressure heat treatment on mechanical and sliding wear properties of Cr phase in Cu51.36Cr48.64 alloy were investigated. The results show that high pressure heat treatment can enhance the compactness of Cr phase, increase its hardness and elastic modulus, when the pressure was over 3GPa, the hardness of Cr phase increase slightly with the increase of pressure. Meanwhile, high pressure heat treatment can also decrease its friction coefficient.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 3rd International Conference on Machinery, Materials and Information Technology Applications
Series
Advances in Computer Science Research
Publication Date
November 2015
ISBN
978-94-6252-120-9
ISSN
2352-538X
DOI
10.2991/icmmita-15.2015.271How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Jinzhu Zhao
AU  - Shengxue Yu
PY  - 2015/11
DA  - 2015/11
TI  - Effects of high pressure heat treatment on mechanical and sliding wear properties of Cr phase in Cu51.36Cr48.64 alloy
BT  - Proceedings of the 2015 3rd International Conference on Machinery, Materials and Information Technology Applications
PB  - Atlantis Press
SP  - 1469
EP  - 1474
SN  - 2352-538X
UR  - https://doi.org/10.2991/icmmita-15.2015.271
DO  - 10.2991/icmmita-15.2015.271
ID  - Zhao2015/11
ER  -