Proceedings of the 2015 3rd International Conference on Machinery, Materials and Information Technology Applications

Research on the applicability of DOE about optimizing manufacturing process parameters

Authors
XinHu Zhang, Min Huang
Corresponding Author
XinHu Zhang
Available Online November 2015.
DOI
10.2991/icmmita-15.2015.245How to use a DOI?
Keywords
Process Parameter; DOE; Orthogonal Design; Uniform Design; Robust Parameter Design; Flame Spraying; Casting Process.
Abstract

The reliability of process system not only affects the production and qualified rate of the product, due to the imperfect system of process causing the defects in the manufacturing process, but also makes the product producing early fault or reducing the service life. Therefore, the reliability of process system has a great influence on the reliability, availability and maintenance cost of the product. The influence of process parameters on the reliability of process system is very great. If we can optimize the process parameters, it must improve the reliability of process system. As a result, the process system also must produce the high quality products. The design of experiment (DOE) is a good method to optimize the process parameters, and it is divided into the real test and the computer simulation experiment in this paper. The methods of experiment are applied to solving the problem about real test and simulation test. This paper uses the design of uniform experiment to solving the problem about casting process simulation of turbine stator blade, and uses the design of robust parameter experiment to solving the problem about flame spraying process of compressor casing.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2015 3rd International Conference on Machinery, Materials and Information Technology Applications
Series
Advances in Computer Science Research
Publication Date
November 2015
ISBN
978-94-6252-120-9
ISSN
2352-538X
DOI
10.2991/icmmita-15.2015.245How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - XinHu Zhang
AU  - Min Huang
PY  - 2015/11
DA  - 2015/11
TI  - Research on the applicability of DOE about optimizing manufacturing process parameters
BT  - Proceedings of the 2015 3rd International Conference on Machinery, Materials and Information Technology Applications
PB  - Atlantis Press
SP  - 1322
EP  - 1327
SN  - 2352-538X
UR  - https://doi.org/10.2991/icmmita-15.2015.245
DO  - 10.2991/icmmita-15.2015.245
ID  - Zhang2015/11
ER  -