Proceedings of the 2017 5th International Conference on Mechatronics, Materials, Chemistry and Computer Engineering (ICMMCCE 2017)

Directional Wettability of Butterfly Wing and Biomimetic Preparation of Superhydrophobic Polymer Film by Soft Lithography

Authors
Yan Fang, Gang Sun, Dandan Jin, Jing Wang, Yongfang Hou, Fei Dong
Corresponding Author
Yan Fang
Available Online September 2017.
DOI
10.2991/icmmcce-17.2017.68How to use a DOI?
Keywords
Wettability; Anisotropism; Preparation; Polymer; Butterfly.
Abstract

The micro-morphology, superhydrophobicity, adhesive property and chemical composition of the butterfly wing surface were investigated by a scanning electron microscope (SEM), a contact angle (CA) meter and a Fourier transform infrared spectrometer (FT-IR). The wetting mechanism of the butterfly wing was discussed from the perspective of biological coupling. The butterfly wing displays multiple-dimensional structural anisotropism. The micrometric scales constitute the primary structure, the submicrometric vertical ribs and horizontal bridges constitute the secondary structure, and the nano stripes constitute the tertiary structure. The wing surface is of superhydrophobicity (CA 150.4~155.7°) and low adhesion (sliding angle 1~4°). The water droplet exhibits directional sliding behavior on the wing. The scale plays a crucial role in determining the self-cleaning property of the wing. Using butterfly wing as a bio-template, superhydrophobic polymer (polydimethylsiloxane, PDMS) film was prepared by soft lithography. The rough micro-morphology and wettability of the butterfly wing were replicated very well to the biomimetic film with water CA of 151.5°. The cooperation of hydrophobic material and rough microstructure contributes to the special wettability of the wing. The butterfly wing can be potentially used as a template for biomimetic design of functional surface with complex wettability.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 2017 5th International Conference on Mechatronics, Materials, Chemistry and Computer Engineering (ICMMCCE 2017)
Series
Advances in Engineering Research
Publication Date
September 2017
ISBN
978-94-6252-381-4
ISSN
2352-5401
DOI
10.2991/icmmcce-17.2017.68How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Yan Fang
AU  - Gang Sun
AU  - Dandan Jin
AU  - Jing Wang
AU  - Yongfang Hou
AU  - Fei Dong
PY  - 2017/09
DA  - 2017/09
TI  - Directional Wettability of Butterfly Wing and Biomimetic Preparation of Superhydrophobic Polymer Film by Soft Lithography
BT  - Proceedings of the 2017 5th International Conference on Mechatronics, Materials, Chemistry and Computer Engineering (ICMMCCE 2017)
PB  - Atlantis Press
SP  - 326
EP  - 329
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmmcce-17.2017.68
DO  - 10.2991/icmmcce-17.2017.68
ID  - Fang2017/09
ER  -