The Effect of High Temperature Coolant and Lubricant on Cutting Process

DOI

10.2991/icmmcce-15.2015.163How to use a DOI?

Keywords

green cutting, coolant, lubricant, chip formation

Abstract

Green cutting is ecologically desirable and have been a tendency in the industry field. High temperature coolant and lubricant can be introduced in metal cutting due to its pollution-free, generating easily and unneeded disposal. This study attempts to understand the effect of high temperature coolant and lubricant on chip formation. In the comparison experiments to dry and wet cutting, high temperature coolant and lubricant flow from a developed generator is applied into cutting zone directly. When K20 tools are used to turn titanium alloy Ti-6Al-4V, Ni-based super alloy GH3030 and stainless steel 1Cr18Ni9Ti in orthogonal cutting, through quick-stop tests, the photos of polished chip sections microstructure were obtained. And the results suggest that the application of high temperature coolant and lubricant produces the least BUE, tool-chip contact length but the largest deformation coefficient and shear angle.

Copyright

© 2015, the Authors. Published by Atlantis Press.

Open Access

This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

TY  - CONF
AU  - Y. Zhang
AU  - B.M. Li
AU  - L. Han
AU  - Q. Li
AU  - L.P. Dong
AU  - Y.Q. Ma
PY  - 2015/12
DA  - 2015/12
TI  - The Effect of High Temperature Coolant and Lubricant on Cutting Process
BT  - Proceedings of the 4th International Conference on Mechatronics, Materials, Chemistry and Computer Engineering 2015
PB  - Atlantis Press
SP  - 814
EP  - 817
SN  - 2352-538X
UR  - https://doi.org/10.2991/icmmcce-15.2015.163
DO  - 10.2991/icmmcce-15.2015.163
ID  - Zhang2015/12
ER  -