Proceedings of the 3rd International Conference on Mechanical Engineering and Intelligent Systems (ICMEIS 2015)

Modeling of the Glaze Layer Thickness Distribution Formed by the Air Spray Oriented to Glaze Spray Process Parameters

Authors
Botai Zhao, Hao Feng, Ligang Cao, Shengrui Yu
Corresponding Author
Botai Zhao
Available Online August 2015.
DOI
10.2991/icmeis-15.2015.63How to use a DOI?
Keywords
glaze spraying; simulation; glaze layer thickness distribution; regression analysis
Abstract

In order to improve efficiency of modeling glaze layer thickness distribution via air spray, a novel fast modeling method was developed which oriented to glaze spraying process parameters. According to analysis of the affecting factors of glaze layer formation, apply the software of the Fluent was utilized to simulate, the glaze layer was simulated through the orthogonal experiment method, and the regression analysis method was used to build the mathematical relationship model between the main parameters of the glaze spaying and the glaze layer thickness distribution structural parameter. Given any a group spray glazing process parameters, and the model and the experiment were applied which can get the glaze layer thickness distribution structural parameters respectively. By comparing analysis that the relative error is within 5%, the accuracy of the model was verified. Therefore, the method oriented to glaze spraying process parameters has a certain engineering application value.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 3rd International Conference on Mechanical Engineering and Intelligent Systems (ICMEIS 2015)
Series
Advances in Engineering Research
Publication Date
August 2015
ISBN
10.2991/icmeis-15.2015.63
ISSN
2352-5401
DOI
10.2991/icmeis-15.2015.63How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Botai Zhao
AU  - Hao Feng
AU  - Ligang Cao
AU  - Shengrui Yu
PY  - 2015/08
DA  - 2015/08
TI  - Modeling of the Glaze Layer Thickness Distribution Formed by the Air Spray Oriented to Glaze Spray Process Parameters
BT  - Proceedings of the 3rd International Conference on Mechanical Engineering and Intelligent Systems (ICMEIS 2015)
PB  - Atlantis Press
SP  - 345
EP  - 350
SN  - 2352-5401
UR  - https://doi.org/10.2991/icmeis-15.2015.63
DO  - 10.2991/icmeis-15.2015.63
ID  - Zhao2015/08
ER  -