Proceedings of the 8th International Conference on Management and Computer Science (ICMCS 2018)

Study on Deep Hole Nesting System and Tool of TC4 Titanium Alloy

Authors
Zhanfeng Liu, Jiankang Xie
Corresponding Author
Zhanfeng Liu
Available Online October 2018.
DOI
10.2991/icmcs-18.2018.65How to use a DOI?
Keywords
TC4 titanium alloy; Trepanning machining; Processing system; Trepanning drill
Abstract

For the difficult machining of large-aperture deep-hole machining and the difficult machinability of TC4 material, the type of machining system and different geometric parameters of the drill bits are optimized. Then the deep-hole nesting test was conducted. The test results showed that the inner wall of the processing hole has high precision and good chip evacuation. Provides effective tool geometric parameters and machining systems for large diameter deep hole nesting of TC4 titanium alloys.

Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 8th International Conference on Management and Computer Science (ICMCS 2018)
Series
Advances in Computer Science Research
Publication Date
October 2018
ISBN
978-94-6252-590-0
ISSN
2352-538X
DOI
10.2991/icmcs-18.2018.65How to use a DOI?
Copyright
© 2018, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Zhanfeng Liu
AU  - Jiankang Xie
PY  - 2018/10
DA  - 2018/10
TI  - Study on Deep Hole Nesting System and Tool of TC4 Titanium Alloy
BT  - Proceedings of the 8th International Conference on Management and Computer Science (ICMCS 2018)
PB  - Atlantis Press
SP  - 321
EP  - 325
SN  - 2352-538X
UR  - https://doi.org/10.2991/icmcs-18.2018.65
DO  - 10.2991/icmcs-18.2018.65
ID  - Liu2018/10
ER  -