Proceedings of the International Conference on Innovation in Science and Technology (ICIST 2020)

Mechanical Properties of Imitation Sprocket Due to Treatment of Candlenut Shell Charcoal

Authors
Fransisco P. Niron*, Agustinus Deka Betanagustinusbetan@gmail.com, Amiruddin Abdullah1w2a2f@gmail.com, Duran Horeyolanyoel68@gmail.com
State Polytechnic of Kupang, Padang, Indonesia
Corresponding Author
Fransisco P. Niron
Available Online 30 November 2021.
DOI
10.2991/aer.k.211129.047How to use a DOI?
Keywords
carburizing; temperature; candlenut shell; imitation sprocket
Abstract

The sprocket as a component of motorcycle manufactured to transmit rotary motion between two shafts are supposed to possess wear resistant properties. This motorcycle part are however produced in different wear resistance levels especially low, medium and high. Meanwhile, low grade sprocket (imitation) are known to wear off easily, however this challenge are usually tackled by increasing the surface hardness. Furthermore, carburizing process is one of the different ways to increase surface hardness of sprockets in direct contact with chains. This study therefore aims to utilize nutmeg shell as an activated carbon for hardening sprocket. The experiments was conducted with carburizing process at temperatures of 850°C to 900°C and 1 hour holding time then quenched in water, brine or oil media. The outcome of this study showed mechanical properties of imitation sprocket increased from 103.2 HV to 452.65 HV at 850°C with water quenching.

Copyright
© 2021 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Download article (PDF)

Volume Title
Proceedings of the International Conference on Innovation in Science and Technology (ICIST 2020)
Series
Advances in Engineering Research
Publication Date
30 November 2021
ISBN
978-94-6239-472-8
ISSN
2352-5401
DOI
10.2991/aer.k.211129.047How to use a DOI?
Copyright
© 2021 The Authors. Published by Atlantis Press International B.V.
Open Access
This is an open access article under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Fransisco P. Niron
AU  - Agustinus Deka Betan
AU  - Amiruddin Abdullah
AU  - Duran Hore
PY  - 2021
DA  - 2021/11/30
TI  - Mechanical Properties of Imitation Sprocket Due to Treatment of Candlenut Shell Charcoal
BT  - Proceedings of the International Conference on Innovation in Science and Technology (ICIST 2020)
PB  - Atlantis Press
SP  - 217
EP  - 221
SN  - 2352-5401
UR  - https://doi.org/10.2991/aer.k.211129.047
DO  - 10.2991/aer.k.211129.047
ID  - Niron2021
ER  -