Proceedings of the First International Conference on Information Sciences, Machinery, Materials and Energy
1273 authors
- An, Pu
- Simulation of Command and Control Network Services Base on M2E2M
- Bai, Hao
- Research on penetration level of distributed generation in distribution network
- Bai, Lihong
- Research on Dynamic Reactive Power Optimization of Distribution Network Based on Modern Mathematical Algorithms
- Bai, Qinghua
- Design of Advanced Static Var Generator
- Ban, Yuxin
- Enhancement of the thermal conductivity of Cu Matrix by addition of RGO
- Bin, Zhuge
- Virtual Tenant Network Research based on Price Mechanism in SDN Architecture
- Bu, Linxin
- Calculation and analysis of the wave load of jack-up offshore wind turbine installation vessel during dynamic positioning
- Cai, Kerong
- Design and realization of hardware-in-the-loop simulation system for pulsed laser fuze
- Cai, Lijuan
- Face recognition with illumination, pose and expression variations using SIFT method
- Cai, Weiling
- An Effective and Efficient FCM for Segmenting Color Image with High Intensity Noise
- Cai, Yifei
- Research on the arc and the water gate valve continuum topology optimization design
- Cai, Yuanbo
- Wind Field CFD Analysis on the Flat Roof of the Building
- Cai, Yun
- The Effects of Magnetic Targeted Nano-particles upon Levels of Cytokines in Serum and Synovial Fluid of Experimental Arthritis Rats
- Cai, Zhiyuan
- Analysis and Study on the Interrupting Characteristic of XRNT High-Voltage Current-Limiting Fuse
- Cao, Jin
- Near Infrared Spectroscopy Analysis Based on Support Vector Machine
- Cao, Ning
- Study on desalination of brackish water and causes of arid area
- Cao, Qipeng
- Positioning Accuracy Analysis of Mapping and Surveying Satellite Using Laser Altimeter
- Cao, Rui
- Semantic Similarity Algorithm Based on Generalized Regression Neural Network
- Cao, Songliu
- Application Study on New-Type Bamboo Materials in Space Design
- Cao, Xintian
- The Optimization Design of Two Stages Helical Gear Reducer Based on GA and Nastran
- Chang, Deqiang
- Research on geothermal distribution of Hongtoushan underground metal mine
- Chang, Deqiang
- Test and analysis for ventilation system of Hongtoushan underground mine
- Chang, Yi
- Study on Project Management Information System of Engineering Based on WBS
- Chao, Daihong
- Study of WLAN Fingerprinting Indoor Positioning Technology based on Smart Phone
- Chao, Peng
- The application of Function Analysis in development of rehabilitation product
- Che, Jianming
- The Research on Topological Reconstruction Method of Triangular Mesh under Multi-core Environment
- Chen, C.-H.
- Study on a Caisson Based OWC Wave Energy Converting System
- Chen, Chao
- Big Data Applications in Power Industry
- Chen, Feixiong
- Multi-agent System based Dynamic Control Framework for Grid-connected Microgrids
- Chen, Guo
- Experimental study on high strength bolt pre-tightening force of friction energy dissipation device
- Chen, H.X.
- Effect of Marangoni convection by using computation simulation during the Kyropoulos sapphire crystal growth
- Chen, Hong-wu
- Design of Signs Information Monitoring System for Man Overboard Based On BeiDou Satellite Navigation System
- Chen, Huanqiang
- Input Constraints Sliding Mode Control Based on RBF Network Compensation
- Chen, Huimin
- Design and realization of hardware-in-the-loop simulation system for pulsed laser fuze
- Chen, Jiayong
- The Design and Implementation of Disaster Recovery in Dual-active Cloud Center
- Chen, Jing
- The analysis and application of distance vector routing protocol
- Chen, Jing
- Application of Similarity Measure between Vague Sets in Network Information Filtering
- Chen, Jingwen
- Model and simulation on a shock test bed for gun breechblock system
- Chen, Jiongwei
- Computer Software Aided Regression Analysis of Correlation between Internet Communication and Residents’ Consumption
- Chen, Li
- RETRACTION: The Effect of Interposable Configurations on Electrical Engineering
- Chen, Li
- A Fast Handwritten Digit Recognition Algorithm Based on Improved SVM
- Chen, Minyou
- An Improved alpha-beta Transformation Method of Voltage Sag Detection
- Chen, Minyou
- Multi-agent System based Dynamic Control Framework for Grid-connected Microgrids
- Chen, Pan-pan
- Design and Uncertainty Evaluation of the Tiny Gas Flow Calibrator
- Chen, Shan Xiong
- On Compaction Characteristics and Particle Breakage of Soil-aggregate Mixture
- Chen, Shiwei
- Review of Laminar Convection Heat-Transfer with Microencapsulated Phase Change Material Slurry
- Chen, Tianyi
- Wood Materials Defects Detection Using Image Block Percentile Color Histogram and Eigenvector Texture Feature
- Chen, Tianyi
- An exposure guided background subtraction for smart camera
- Chen, Wei
- Design of a flow integrating information system based on cloud computing
- Chen, Xi
- Design and Simulation of Electrostatic Imaging System based on MEMS
- Chen, Xiangning
- A Fusion Method of Interesting Targets Detection
- Chen, Xiao
- The Design and Implementation of Disaster Recovery in Dual-active Cloud Center
- Chen, Xiaosong
- Research on geothermal distribution of Hongtoushan underground metal mine
- Chen, Xiaosong
- Test and analysis for ventilation system of Hongtoushan underground mine
- Chen, Xiaowei
- A system preventing children from getting hit while passing by the front based on laser sensor
- Chen, Xiaowei
- A design of SMS alarm system based on 51 SCM and GPS positioning module
- Chen, Xiaowei
- A SMS Alerted Anti-theft System based on 51 SCM
- Chen, Xiaowei
- Research and design of an Anti Omissions System Based on Single-chip Processor
- Chen, Xiaoxia
- Studies on Single-flow Continuous Culture Control System of Simulated Rumen in Vitro
- Chen, Xiong
- Experimental Study of the Fracture of the Bonding Interface between the EPDM Films
- Chen, Y.L.
- Combining Penalty Function with Modified Chicken Swarm Optimization for Constrained Optimization
- Chen, Yandong
- Research on the Design of Interface in the Micro-Portal Web Game
- Chen, Yang
- Finite Element Analysis on the Objective table of Virtual slice non-destructive measurement device
- Chen, Yang
- Efficient Resources Allocation for Femtocells in Heterogeneous Cellular Networks
- Chen, Ye
- Design of Certain Diagnostic Expert System for the Aircraft Armament Equipment
- Chen, Ying
- Simulation of Command and Control Network Services Base on M2E2M
- Chen, Yu
- The Evaluation of Plant-Microbial Remediation of Petroleum Contaminated Soil
- Chen, Yu-tong
- Research on the visual detection device of partial discharge visual imaging precision positioning
- Chen, Yunmeng
- Seismic response analysis on the prestressed concrete converting truss structure
- Chen, Yutong
- Research on the power signal processing system space discharge location
- Chen, Zhiqiang
- Implementation of portable common building ground resistance measuring instrument
- Chen, Zhuo
- A New Secure Authentication Mechanism for SIP Using Chaos–based Cryptography
- Chen, Zhuo
- A concise operation safety protection device in arm of tower crane and its parameter design
- Chen, Zusheng
- A Method of Traffic Lights Detection Based on Visual Selective Attention
- Cheng, Dongqin
- Designing of 3-Dimensional Underwater Fish Observation System and Experimental Research
- Cheng, Fang
- The Grid Resource Discovery Model based on RWSRF
- Cheng, Fangling
- Vision Sensor Calibration Method based on Flexible 3d Target and Invariance of Cross Ratio
- Cheng, Guoping
- Computer Software Aided Regression Analysis of Correlation between Internet Communication and Residents’ Consumption
- Cheng, Jia
- Design and Uncertainty Evaluation of the Tiny Gas Flow Calibrator
- Cheng, Kefei
- The Implementation of a Network Traffic Detection Model Based on GPU and CPU Heterogeneous Platform
- Cheng, LvSha
- Advantages, Limitations, and Future Trends for Biofabrication Techniques in Tissue Engineering
- Cheng, Meng
- The Effects of Magnetic Targeted Nano-particles upon Levels of Cytokines in Serum and Synovial Fluid of Experimental Arthritis Rats
- Cheng, Peng
- The research of Media streaming technology based on RTP protocol
- Cheng, Peng
- A digital forensic model based on data mining
- Cheng, Sujun
- Research on the development and application of physical materials
- Cheng, Tao
- Study of PCB micro-drilling geometry detection method based on machine vision
- Cheng, Xinxiu
- Library Electronic Resource Scheduling Research based on Ant Colony Algorithm
- Chi, Xiaowen
- Research on Product Technical Maturity Forecasting and R & D strategy based on TRIZ
- Chi, Xuezhi
- Research on Computer Crime Evidence Retrieval Method based on Ontology
- Chiu, Y.-F.
- Study on a Caisson Based OWC Wave Energy Converting System
- Chu, Hongzhen
- A Research on NC Machining Cutting Parameters Optimization
- Chu, Xianwu
- Implementation of Electronic Recognition System for Railway Logistics Based on Internet of Things Technology
- Congi, Qiang
- Satellite SAR Antenna Deployable Structure Design and Kinematic Analysis
- Cui, Jianbo
- Workload Balance based Dynamic Resource Allocation Model in the Cloud Data Center
- Cui, Jianzhong
- Numerical Simulation on Movement Behavior of Air Bubbles in Viscous Fluid
- Cui, Yang
- Aircraft Spareparts Demand Forecasting based on Multiple ARIMA Model
- Cui, Yang
- The Study of Selection of Air Material Storehouse based on Second Generation of Genetic Algorithm in Site
- Cui, Yansong
- Design and implementation of ZigBee wireless bus monitoring system
- Cui, Zeyu
- A Computer Simulation Algorithm About Traffic Flow
- Dai, Yongjuan
- Influence of temperature on pyrolysis of waste tire under nitrogen atmosphere