Proceedings of the 2nd International Conference on Education, Science, and Technology (ICEST 2017)

Investigating the Performance of Embossing on Fins Wheel of Agricultural Tractor

Authors
Muhammad Arsyad Suyuti, Rusdi Nur
Corresponding Author
Muhammad Arsyad Suyuti
Available Online September 2017.
DOI
https://doi.org/10.2991/icest-17.2017.69How to use a DOI?
Keywords
Bending; Deflection, Embossing, Fins Wheel, Hardness
Abstract
The Fins wheel of the tractor was the most important part of a tractor to plough the field. Fins wheel was damaged due to lack of ability fins tractor wheels withstand bending loads as well as influenced by the age of the fin itself. This study was conducted to determine how the effects of embossing on the maximum bending load, deflection, ultimate tensile strength, and hardness which occur by using variations of the embossing number 1 and 2, and high embossing of 4, 5, 6 mm. The type of material used is JIS 3101 SS 400 with a thickness plate of 3.8 mm. This research was conducted by starting the design and press tool manufacture (punch & dies), manufacturing materials to be formed into fins wheel tractor, forming plates become fins wheel tractor, perform bending test to determine the maximum bending load strength and deflection that occurs. The experimental results showed that the finned wheel of the tractor which has two embossing with embossing height 6 mm would generate the smallest deflection of 4.93 mm and the maximum bending load of 4.0 kN. Fin wheel tractor with embossing can hold maximum bending loads greater than the soil pressure of 1.6 kN. Increasing the height of embossing will increase the hardness and ultimate tensile strength. The higher value of hardness and ultimate tensile strength was obtained at embossing height of 6 mm for 167,66 HB and 586,81 N/mm2 respectively.
Open Access
This is an open access article distributed under the CC BY-NC license.

Download article (PDF)

Proceedings
2nd International Conference on Education, Science, and Technology (ICEST 2017)
Part of series
Advances in Social Science, Education and Humanities Research
Publication Date
September 2017
ISBN
978-94-6252-403-3
ISSN
2352-5398
DOI
https://doi.org/10.2991/icest-17.2017.69How to use a DOI?
Open Access
This is an open access article distributed under the CC BY-NC license.

Cite this article

TY  - CONF
AU  - Muhammad Arsyad Suyuti
AU  - Rusdi Nur
PY  - 2017/09
DA  - 2017/09
TI  - Investigating the Performance of Embossing on Fins Wheel of Agricultural Tractor
BT  - 2nd International Conference on Education, Science, and Technology (ICEST 2017)
PB  - Atlantis Press
SP  - 210
EP  - 213
SN  - 2352-5398
UR  - https://doi.org/10.2991/icest-17.2017.69
DO  - https://doi.org/10.2991/icest-17.2017.69
ID  - Suyuti2017/09
ER  -