Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016)

FEA Based Simulation and Experimental Analysis of Forces in Dry Milling of Inconel 718

Authors
Nikhil Bauskar, Rahul Mali, T. Gupta
Corresponding Author
Nikhil Bauskar
Available Online December 2016.
DOI
10.2991/iccasp-16.2017.34How to use a DOI?
Keywords
Inconel 718, Numerical Simulation, Deform 3D, Cutting forces
Abstract

Machining process simulation is an important aspect in the manufacturing context that generates a scenario to enhance the process performance in terms of time and cost. With unique high temperature and stress properties and applications of Inconel 718 material in various sectors of engineering, the machinability assessment has become an important issue which needs a detailed investigation. The present work has been attempted to study and compare experimental results with simulation results based on finite element approach in dry milling of Inconel 718 with coated carbide inserts. During machining of Inconel 718, cutting tool environment reaches very high localized temperatures and high stresses due to repeated impact loads during interrupted cutting. The milling tests were conducted under various cutting conditions to investigate their effect on the response parameters. A simulation model based on finite element approach is proposed using DEFORM 3D to investigate cutting forces in end milling operation. The simulation results are validated with the experimental trials. An average error of 7% is obtained in the response function.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016)
Series
Advances in Intelligent Systems Research
Publication Date
December 2016
ISBN
10.2991/iccasp-16.2017.34
ISSN
1951-6851
DOI
10.2991/iccasp-16.2017.34How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Nikhil Bauskar
AU  - Rahul Mali
AU  - T. Gupta
PY  - 2016/12
DA  - 2016/12
TI  - FEA Based Simulation and Experimental Analysis of Forces in Dry Milling of Inconel 718
BT  - Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016)
PB  - Atlantis Press
SP  - 206
EP  - 211
SN  - 1951-6851
UR  - https://doi.org/10.2991/iccasp-16.2017.34
DO  - 10.2991/iccasp-16.2017.34
ID  - Bauskar2016/12
ER  -