Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016)

Design and Development of Press Tool Changing Attachment on Automated Guided Vehicle

Authors
Avinash Panchal, Bhushan Salunkhe, Rahul Patil
Corresponding Author
Avinash Panchal
Available Online December 2016.
DOI
10.2991/iccasp-16.2017.28How to use a DOI?
Keywords
Lift design, Solid Model, Design of hydraulic drives, Hyper mesh, Idle time reduced, etc.
Abstract

In the present work, a hydraulic scissors lift is developed to lift up to 300 kg load at a height of around one meter. This mechanism is specially designed for loading and unloading press tool dies by considering press machine shop where installation of Gantry cranes and use of forklift is not convenient. A simple attachment is also provided for pulling the die from bolster plate to the scissor lift platform. This whole arrangement is mounted on AGV. The objective of the present work is to design and develop a press tool changing attachment with minimum material, minimum overall cost and significant strength. Design calculations must not be exceeded standards, allowable maximum deflection and stresses. To analyze and validate manual calculations, solid modeling and computer simulations are involved using CATIA v5 R19 and Hypermesh 11.0 softwares. Number of linear static FEA analyses has done to get accurate results. From the results we can say that deflection is still in the acceptable range. The research highlights to reduce total idle time of press machine while die changing operation results in increased production rate. Number of trials are taken on the same model in press machine shop. Total time required for changing and remounting the die is reduced by approximately half an hour compared to existing method of press tool changing.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016)
Series
Advances in Intelligent Systems Research
Publication Date
December 2016
ISBN
10.2991/iccasp-16.2017.28
ISSN
1951-6851
DOI
10.2991/iccasp-16.2017.28How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Avinash Panchal
AU  - Bhushan Salunkhe
AU  - Rahul Patil
PY  - 2016/12
DA  - 2016/12
TI  - Design and Development of Press Tool Changing Attachment on Automated Guided Vehicle
BT  - Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016)
PB  - Atlantis Press
SP  - 171
EP  - 175
SN  - 1951-6851
UR  - https://doi.org/10.2991/iccasp-16.2017.28
DO  - 10.2991/iccasp-16.2017.28
ID  - Panchal2016/12
ER  -