Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016)

Residual Stress Analysis in Orthogonal Cutting of AISI 1020 Steel

Authors
Omkar Bhatkar, Sagar Sakharkar, V. Mohan, Raju Pawade
Corresponding Author
Omkar Bhatkar
Available Online December 2016.
DOI
10.2991/iccasp-16.2017.17How to use a DOI?
Keywords
Residual stresses, orthogonal cutting, X-ray diffraction, FEM
Abstract

The aim of research work is to analyze residual stresses generated during shaper machining. This paper presents the simulation of single point cutting process by finite element method and compared with experimental work results. Taguchi L9 experimental design is used to obtain effective process parameters of rake angle, depth of cut and cutting speed. High speed cutting tool steel is used for orthogonal cutting of AISI 1020 steel on shaper machine. The residual stresses are measured by X-ray sine2 diffraction method and finite element software used to simulate residual stress analysis. In Taguchi designed experimentation rake angle 120, depth of cut 1mm, and cutting speed 220m/min has been found optimum cutting parameter for optimize compressive residual stresses.

Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016)
Series
Advances in Intelligent Systems Research
Publication Date
December 2016
ISBN
978-94-6252-305-0
ISSN
1951-6851
DOI
10.2991/iccasp-16.2017.17How to use a DOI?
Copyright
© 2017, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Omkar Bhatkar
AU  - Sagar Sakharkar
AU  - V. Mohan
AU  - Raju Pawade
PY  - 2016/12
DA  - 2016/12
TI  - Residual Stress Analysis in Orthogonal Cutting of AISI 1020 Steel
BT  - Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016)
PB  - Atlantis Press
SP  - 100
EP  - 106
SN  - 1951-6851
UR  - https://doi.org/10.2991/iccasp-16.2017.17
DO  - 10.2991/iccasp-16.2017.17
ID  - Bhatkar2016/12
ER  -