Multi-quality characteristics optimization of WEDM for IN-625 by applying Taguchi DEAR technique
Sachin Sonawane, M. Kulkarni
Available Online December 2016.
- https://doi.org/10.2991/iccasp-16.2017.1How to use a DOI?
- WEDM, Taguchi method, Inconel-625, DEAR, multi-quality characteristic optimization, ANOVA
- To manufacture quality products at lowest cost in industries, optimization is an effective technique which can be applied to find out the best manufacturing conditions. The objective of this research work is to examine the effect of control factors and to choose the correct settings of these factors to maximize MRR and minimize surface roughness and overcut while WEDM of Inconel-625. The control factors chosen for the study are pulse on time, pulse off time, servo voltage, peak current, wire feed rate and wire tension. Experiments were planned as per Taguchi's L27 orthogonal design under diverse cutting conditions of control factors. Data envelopment analysis based ranking technique (DEAR) was employed for multi-quality characteristic optimization. The optimal values of control factors was found as pulse on time 118 µs, pulse of time 41µs, servo voltage 30 volts, peak current 230 Amp, wire feed rate 1 m/min and wire tension 5 Gram. From the outcomes of the ANOVA, Pulse-on time was found to be the major significant factor affecting the quality characteristics.
- Open Access
- This is an open access article distributed under the CC BY-NC license.
Cite this article
TY - CONF AU - Sachin Sonawane AU - M. Kulkarni PY - 2016/12 DA - 2016/12 TI - Multi-quality characteristics optimization of WEDM for IN-625 by applying Taguchi DEAR technique BT - Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016) PB - Atlantis Press SP - 1 EP - 6 SN - 1951-6851 UR - https://doi.org/10.2991/iccasp-16.2017.1 DO - https://doi.org/10.2991/iccasp-16.2017.1 ID - Sonawane2016/12 ER -