Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

The Relationship between Milling Surface Morphology and Corrosion Rate of Nickel Base Superalloy

Authors
Jinping Shi, Yang Qiao, Peiquan Guo
Corresponding Author
Jinping Shi
Available Online October 2015.
DOI
10.2991/icadme-15.2015.394How to use a DOI?
Keywords
superalloy, surface morphology, average rate of corrosion
Abstract

Through the milling of nickel base superalloy, this paper studies the effect regularity of surface morphology on corrosion resistance of nickel base superalloy under the condition of different milling parameters. In order to be more intuitive to characterize the surface morphology, this paper defines Motif area ratio to characterize the surface topography. It is defined as the ratio of the surface area that can meet the threshold condition to the machined surface. Take surface roughness for an example to study the relationship between the surface roughness and the corrosion rate of workpiece. Experiment shows that the workpiece surface topography is the direct reason of the difference of corrosion resistance of workpiece material. The better surface morphology, the lower workpiece average corrosion rate and the worse surface morphology, the rapider average corrosion rate.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
978-94-6252-113-1
ISSN
2352-5401
DOI
10.2991/icadme-15.2015.394How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Jinping Shi
AU  - Yang Qiao
AU  - Peiquan Guo
PY  - 2015/10
DA  - 2015/10
TI  - The Relationship between Milling Surface Morphology and Corrosion Rate of Nickel Base Superalloy
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 2108
EP  - 2112
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.394
DO  - 10.2991/icadme-15.2015.394
ID  - Shi2015/10
ER  -