Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering

Analysis and optimization of CVC backup roll contour of a 1800mm continuous hot rolling mill

Authors
Fei Shang, Hongbo Li, Jie Zhang, Chao Hu, Chao Zhang, Jianfei Chen
Corresponding Author
Fei Shang
Available Online October 2015.
DOI
10.2991/icadme-15.2015.389How to use a DOI?
Keywords
CVC; backup roll; finite element method; roll contact pressure; wear
Abstract

The backup rolls are used with work rolls and their service period is much longer than work rolls. The backup roll affects the control ability of the mill for profile and flatness of products and roll contact pressure. If the backup roll contour is not appropriate, there will be a non-uniform roll contact pressure and the peak value of roll contact pressure may be large. According to the actual situation of a 1800mm CVC mill, combined with the typical wear condition of backup roll, A 3D finite element model of roll system was established. The roll contact pressure is analyzed with the model, and the improvement method of backup roll contour is proposed. With the improved backup roll contour, the non-uniform level of roll contact pressure drops by 18.2% and the peak value of roll contact pressure descends by 19.1%. All these can reduce the consumption of backup roll and the risk of backup roll spalling effectively.

Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Download article (PDF)

Volume Title
Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
Series
Advances in Engineering Research
Publication Date
October 2015
ISBN
10.2991/icadme-15.2015.389
ISSN
2352-5401
DOI
10.2991/icadme-15.2015.389How to use a DOI?
Copyright
© 2015, the Authors. Published by Atlantis Press.
Open Access
This is an open access article distributed under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).

Cite this article

TY  - CONF
AU  - Fei Shang
AU  - Hongbo Li
AU  - Jie Zhang
AU  - Chao Hu
AU  - Chao Zhang
AU  - Jianfei Chen
PY  - 2015/10
DA  - 2015/10
TI  - Analysis and optimization of CVC backup roll contour of a 1800mm continuous hot rolling mill
BT  - Proceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering
PB  - Atlantis Press
SP  - 2087
EP  - 2090
SN  - 2352-5401
UR  - https://doi.org/10.2991/icadme-15.2015.389
DO  - 10.2991/icadme-15.2015.389
ID  - Shang2015/10
ER  -